Bedienungsanleitung Sanitas SFT 75 (Seite 8 von 40) (Englisch, Italienisch)

681472

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

3. Make sure that the sensor tip and al-

so the ear canal are clean. As the ear

canal is slightly curved, you have to

pull the ear slightly up and backwards

before inserting the sensor tip. This

is important so that the sensor tip can

be pointed directly at the eardrum.

Positioning on small children

On infants under 1 year of age:

•

Lay down the infant such that one ear is pointing

upwards.

•

Pull the ear gently backwards before you carefully

insert the sensor tip into the ear.

In small children older than 1:

•

Stand slightly to the side behind the child.

•

Pull the ear gently up and backwards before you

carefully insert the sensor tip into the ear.

Insert the sensor tip carefully and hold down the

ON/MEAS button for one second.

5. The measured value appears on the display and the

end of the measuring is signalled by a short beep (if

button tone is activated).

6. If the measured value is within the normal range

(<38°C/100.4°F), the green LED lights up. If the mea

sured value is higher (≥ 38°C/100.4°F, high tempera-

ture), the red LED is illuminated.

7. The device switches o automatically after 60 seconds.

8. Clean the device after every use as described in the “Cleaning and

storage” chapter.

9.3 Measuring object temperatures

1. Hold down the ON/MEAS button for one second to switch on

the multi functional thermometer.

2. Then hold down the M button and the S button simultaneously for

3 seconds to switch to object temperature mode.

appears on

the LCD display.

3. Hold down the ON/MEAS-= button and

point the sensor tip towards the object or

liquid to be measured (never immerse in liq

uids), maintaining a distance of 3 cm.

4. Release the ON/MEAS button

The measured value appears on the

display and the end of the measuring is

signalled by a short beep (if button tone

is activated).

5. To exit object temperature mode, hold down the M button and the

S button simultaneously again for 3 seconds.

6. The device switches o automatically after 60 seconds.

7. Please note that the displayed temperature is the measured and

not the adapted surface temperature. It is not the same as the fore

head/ear temperature.

9.4 Displaying stored measurements

The device automatically stores the values from the last 30 measure-

ments. When 30 memory spaces are exceeded, the oldest value is deleted.

The stored values can be called up as follows:

Hold down the ON/MEAS button for one second to switch on the

multi functional thermometer.

2. Press the M button. The most recent measurement appears on the

display.

To switch between the individual stored measurements, press the

M button.

4. The device switches o automatically after 60 seconds.

2-3 cm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanitas SFT 75 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sanitas SFT 75

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info