Bedienungsanleitung Sansui COM9100 (Seite 17 von 56) (Englisch)

489593

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

AUTO CLOCK SETTING

The Auto Clock function will automatically set the built-in clock (Month, Day, Year and Time) when the TV/VCR

is connected to an Antenna or Cable system and it is turned off. As the TV/VCR searches for a receivable

station in your area and it receives a broadcast signal for Auto Clock, the Auto Clock needs several minutes to

set itself.

1. Connect the Antenna or Cable system.

• If you use a cable box, turn it on.

2. Plug the AC Power cord to the AC outlet.

3. Make sure the TV/VCR is turned off.

• If you press the POWER button, the Auto Clock set is not effective.

4. Wait at least three minutes and press the POWER button.

5. Press the CALL button to check the clock on the screen.

6. If the clock is not set, check the Antenna condition. The Auto Clock may not function properly if the reception

condition is not good.

AUTO CLOCK SETTING

The Auto Clock Adjustment will be performed at 12:00 PM everyday if you turn off the TV/VCR.

• If you use a cable box and you want Auto Clock adjustment to be performed, the cable box must be left on.

• The Auto Clock Adjustment is not effective when the timer recording is in the stand by mode.

• The Auto Clock Adjustment is not effective when a difference of more than 5 minutes exits between the built-

in clock time and the actual time.

AUTO CLOCK ADJUSTMENT

TO SET AUTO CLOCK TO OFF

When shipped from factory the AUTO CLOCK option is set to ON.

But if you do not want Auto Clock set (Adjustment):

1. Turn on the TV/VCR.

2. Press the MENU button.

3. Press the SET/TRACKING + or – button to select the SYSTEM SET-UP option, then press the ENTER button.

4. Press the SET/TRACKING + or – button to select the AUTO CLOCK option.

5. Press the ENTER button to select OFF.

6. Press the MENU button repeatedly to return to the normal screen.

• When the AUTO CLOCK is set to OFF, the Auto Clock adjustment does not function.

• Set the clock manually (see page 17).

In the rare event that you live within broadcast range of two stations in two different time zones, the TV/VCR

recognize the wrong station for the Auto Clock set.

To correct the situation:

1. Press the MENU button.

2. Press the SET/TRACKING + or – button to select the SYSTEM SET-UP option, then press the ENTER button.

3. Press the SET/TRACKING + or – button to select the STANDARD TIME option, then Press the ENTER button.

4. Press the SET/TRACKING + or – button to select your time zone, then press the ENTER button.

ATLANTIC : GMT – 4 hours (GMT: Greenwich Mean Time)

EASTERN : GMT – 5 hours

CENTRAL : GMT – 6 hours

MOUNTAIN : GMT – 7 hours

PACIFIC : GMT – 8 hours

ALASKA : GMT – 9 hours

HAWAII : GMT – 10 hours

AUTO : AUTO SET

5. Press the MENU button twice to return to the normal screen.

TO SET STANDARD TIME

5450201C E (P04-17) 2*9*99, 16:4415

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sansui COM9100 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info