Bedienungsanleitung Sansui HDLCD3250 (Seite 10 von 27) (Englisch)

489459

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Remote control

HOW TO INSTALL BATTERIES

1. Open the battery compartment cover.

2. Install two “AAA” batteries (supplied).

3. Replace the battery compartment cover.

Before using the remote control, batteries must first be installed.

Use two “AAA” size batteries. The batteries may last

approximately one year depending on how much the

remote control is used. For best performance, it is

recommended that batteries should be replaced on a

yearly basis, or when the remote operation becomes

erratic. Do not mix old and new batteries or different

types.

BATTERY PRECAUTIONS

These precautions should be followed when using

batteries in this device:

Use only the size and type of batteries specified.

Be sure to follow the correct polarity when

installing the batteries as indicated in the battery

compartment. Reversed batteries may cause

damage to the device.

Do not mix different types of batteries together (e.g.

Alkaline and Carbon-zinc) or old batteries with fresh

ones.

If the device is not to be used for a long period of

time, remove the batteries to prevent damage or

injury from possible battery leakage.

Do not try to recharge batteries not intended to be

recharged; they can overheat and rupture. (Follow

battery manufacturer’s directions.)

•

1.POWER Button - Used to turn the power on/off to

the LCD TV.

2.DISPLAY Button - When you press this button,

the current information will be displayed on a

screen. To remove the display from the screen,

press this button again.

3.Direct Channel Selection Buttons (0-9) - Allows

direct access to any channel of the LCD TV.

4.– Button -This button is the “–” button used when

selecting digital channels.

5.MENU Button - Use to display the On-Screen

menu function.

CURSOR ▲/▼/◀/▶

Buttons

- Used to operate the

menu functions of the LCD TV.

7.ENTER Button - Use to enter or select

information for On-Screen operations.

8.MUTE Button - To turn off the sound, press this

button once. The LCD TV will be silenced and

the symbol “Mute” will appear on the screen. The

muting feature can be released by pressing the

MUTE button again or one of the VOL (VOLUME)

+ or – buttons.

9.VOL (VOLUME) + / – Buttons - Press the +

button to increase, or the – button to decrease the

sound level.

10.INPUT SELECT Button - Use to change the

external input.

11.CCD Button - Used to display the Closed Caption

menu screen.

12.SLEEP Button - To set the LCD TV to turn off

after a preset amount of time, use the SLEEP

button on the remote control.

13.PICTURE SIZE Button - Used to change the

picture size.

14.RECALL Button - This button allows you to go

back to the previous channel selected by just

pressing the RECALL button. Press this button

again to return to the channel you were watching.

15.EXIT Button - Press to remove setup menu.

16.AUDIO Button - Change sound track language.

17.CH (CHANNEL)

/ Buttons - To change the

channels of the LCD TV.

3FN0121B_En.indd 103FN0121B_En.indd 10 2/17/11 6:38:15 PM2/17/11 6:38:15 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sansui HDLCD3250 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info