Bedienungsanleitung Sansui HDLCD3700 (Seite 9 von 45) (Englisch)

489590

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Remote control

1. Open the battery compartment cover.

2. Install two “AA” batteries (supplied).

HOW TO INSTALL BATTERIES

Before using the remote control, batteries must first be installed.

3. Replace the battery compartment cover.

BATTERY PRECAUTIONS

These precautions should be followed when using

batteries in this device:

• Use only the size and type of batteries specified.

• Be sure to follow the correct polarity when installing

the batteries as indicated in the battery compart-

ment. Reversed batteries may cause damage to the

device.

• Do not mix different types of batteries together (e.g.

Alkaline and Carbon-zinc) or old batteries with fresh

ones.

• If the device is not to be used for a long period of

time, remove the batteries to prevent damage or

injury from possible battery leakage.

• Do not try to recharge batteries not intended to be

recharged; they can overheat and rupture. (Follow

battery manufacturer's directions.)

Use two “AA” size batteries. The batteries may last

approximately one year depending on how much the

remote control is used. For best performance, it is

recommended that batteries should be replaced on a

yearly basis, or when the remote operation becomes

erratic. Do not mix old and new batteries or different

types.

1. POWER Button - Used to turn the power on/off to

the LCD TV.

2. SLEEP Button - To set the LCD TV to turn off after

a preset amount of time, use the SLEEP button on

the remote control.

3. Direct Channel Selection Buttons (0-9) - Allows

direct access to any channel of the LCD TV.

4. – Button -This button is the “–” button used when

selecting digital channels.

5. RESET Button - Press to reset the On-Screen

picture adjustments to their factory preset positions.

6. CH (CHANNEL)

/ /CURSOR ▲ / ▼ Buttons -

Used to operate the menu functions of the LCD TV,

and to change the channels of the LCD TV.

7. MENU Button - Use to display the On-Screen

menu function.

8. MUTE Button - To turn off the sound, press this

button once. The LCD TV will be silenced and the

symbol “MUTE” will appear on the screen. The

muting feature can be released by pressing the

MUTE button again or one of the VOL (VOLUME)

+ or – buttons.

9. DISPLAY Button - When you press this button,

the current information will be displayed on a

screen. To remove the display from the screen,

press this button again.

10. PICTURE SIZE Button - Press to display

PICTURE SIZE menu.

11. INPUT SELECT Button - Press to display

SOURCE SELECTION menu.

12. QUICK VIEW Button - This button allows you to

go back to the previous channel selected by just

pressing the QUICK VIEW button. Press this

button again to return to the channel you were

watching.

13. CLOSED CAPTION Button - Displays text

captions or full screen text on the screen for

hearing impaired viewers.

14. ENTER Button - Use to enter or select

information for On-Screen operations.

15. VOL (VOLUME) + / – / CURSOR

/ Buttons -

Used to operate the menu functions of the LCD

TV. Press the button to increase, or the

button to decrease the sound level.

16. EXIT Button - Press to remove setup menu.

31R0101C_En_p06-11 07.3.20, 6:26 PM9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sansui HDLCD3700 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info