Bedienungsanleitung Sansui HDLCDVD328 (Seite 19 von 39) (Englisch)

489572

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

ENGLISH

Clear All

All channels are deleted from the channel memory.

Select “Channel”, then press ▶ or ENTER.

Press ▲ or ▼ to select “Add/Delete”, then press ▶

or ENTER.

Press ▲ or ▼ to select “Clear All”, then press ▶ or

ENTER.

Add/Delete

Adding Channel >>

Clear All >>

Add/Delete >>

ENTER :Set:Select

Checking the digital

signal strength

This TV will allow you to view the digital signal

meter for digital channels.

Select “Channel”, then press ▶ or ENTER.

Press ▲ or ▼ to select “DTV Signal”.

Press ▶ or ENTER to check the digital signal

strength.

The digital signal strength screen will appear.

If necessary, adjust the direction of the antenna to

obtain the maximum signal strength.

Signal Level

0 50 100

DTV Signal

NOTE:

Signal meter feature is not available for analog

channels.

After 240 seconds, DTV Signal screen will return to

normal TV operation automatically.

•

Labeling channels

Channel label appear with the channel number

display each time you turn on the TV, select a

channel, or press DISPLAY.

You can choose any four characters to identify a

channel.

To create channel labels

Select “Channel”, then press ▶ or ENTER.

Press ▲ or ▼ to select “Ch Label”, then press ▶

or ENTER.

The Ch Label menu will appear.

Press ◀ or ▶ to select a channel you want to

label, then press ▼.

Ch Label

Label Clear

Ch Label

Channel Number

15-1

CH-1

:Adjust

:Select

Press ◀ or ▶ repeatedly until the character you

want appears in the first space.

Label Clear >>

Ch Label

Channel Number 15-1

Ch Label

CH-1

:Adjust

:Select

ENTER :Set

The characters rotation as follows:

SPACE

, () @ / + =

If the character which you desire appears, press

ENTER.

Repeat this step to enter the rest of the characters.

If you would like a blank space in the label name,

you must choose the empty space from the list of

characters.

Repeat steps 3-4 for other channel. You can

assign a label to each channel.

When you finish inputting the label name, press

EXIT to return to the normal screen.

To clear a Ch Label

After step 3 above, press ▲ or ▼ to select “Label

Clear”, then press ▶ or ENTER.

NOTE:

The channel labels will be reset after “Automatic

Search” on page 18.

Labeling video inputs

The Video Label feature allows you to label each

input source for your TV.

Select “Setup”, then press ▶ or ENTER.

Press ▲ or ▼ to select “Video Label”, then press

▶ or ENTER.

Press ▲ or ▼ to select an input which you want to

label.

Press ◀ or ▶ to select the desired label for that

input source.

Video2 -

Component -

HDMI1

Video Label

Video1 -

:Adjust

:Select

HDMI2 -

PC -

– / VCR / DVD / STB / Cable / Satellite / Receiver /

Game / Camcorder / PC / DVI PC / Blu-ray

•

56Q0121A_eng.indd 1956Q0121A_eng.indd 19 2/7/11 10:06:09 AM2/7/11 10:06:09 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sansui HDLCDVD328 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info