Bedienungsanleitung Sansui HDPDP5050 (Seite 10 von 56) (Englisch)

489521

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Remote control

12. DISPLAY Button - When the TV is receiving an

analog signal pressing this button will display the

current information on-screen. When the TV is

receiving a digital, pressing this button once will

display the digital information on-screen; pressing it a

second time will display the analog information on-

screen. To remove the display from the screen, press

this button again.

13. QUICK VIEW Button - This button allows you to go

back to the previous input source selected by just

pressing the QUICK VIEW button. Press this button

again to return to the channel you were watching.

14. INPUT SELECT Button - Press to display SOURCE

SELECTION menu.

15. CH ENTER/– Button* - Some connected equipment

such as a Cable/Satellite box, VCR, or DVD may

require this button to input selected channels. This

button is also the “–” button used when selecting

digital channels.

16. CLOSED CAPTION Button - Displays text captions

or full screen text on the screen for hearing impaired

viewers.

17. ENTER Button - Use to enter or select information

for On-Screen operations.

18. VOL (VOLUME) + / – / CURSOR

/ Buttons -

Used to operate the menu functions of the Plasma

TV. Press the

button to increase, or the button

to decrease the sound level.

19. EXIT Button - Press to remove setup menu.

20. DVD Operation Buttons* - Press to operate your

DVD if programmed properly using a code listed on

page 13.

1. PLASMA TV, VCR, CBL (Cable/Satellite box), DVD

POWER Button* - Used to turn the Plasma TV,

VCR, Cable/Satellite box or DVD on or off after you

select the operating mode.

2. SLEEP Button - To set the Plasma TV to turn off

after a preset amount of time, use the SLEEP button

on the remote control.

3. Direct Channel Selection Buttons (0-9)* - Allows

direct access to any channel of the VCR, Cable/

Satellite box or DVD.

4. MUTE Button - To turn off the sound, press this

button once. The Plasma TV will be silenced and the

symbol “MUTE” will appear on the screen. The

muting feature can be released by pressing the

MUTE button again or one of the VOL (VOLUME) +

or – buttons.

5. RESET Button - Press to reset the On-Screen

picture adjustments to their factory preset positions.

6. CH (CHANNEL)/CURSOR ▲ / ▼ Buttons* - Used to

operate the menu functions of the Plasma TV, and to

change the channels of a Cable/Satellite box.

7. MENU Button - Use to display the On-Screen menu

function.

8. 16:9 Button - Press to display PICTURE SIZE menu.

9. VCR Operation Buttons* - Press to operate your

VCR if programmed properly using a code listed on

page 12.

10. TV, VCR, CBL (Cable/Satellite box), DVD Selector

Switch - Slide to select the Plasma TV, VCR, Cable/

Satellite box or DVD to be operated.

11. CODE SET Button - Used to register the 3-digit

codes to operate your VCR or Cable/Satellite box.

(See page 12 and 13).

* You can use these buttons to operate

your VCR, Cable/Satellite box or DVD

after you have programmed the re-

mote control for the code that oper-

ates your VCR, Cable/Satellite box or

DVD (see page 12 and 13).

3X81001A_En_p06-13 06.8.22, 4:09 PM10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sansui HDPDP5050 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info