Bedienungsanleitung Sanyo ce42fd90 (Seite 42 von 53) (Englisch)

145103

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

English - 41 -

Mute Function

Press “ ” button to disable sound. Mute

indicator will be displayed in the upper side of

the screen.

To cancel mute, there are two alternatives; the

ﬁ rst one is pressing the “

” button and the

second one is increasing the volume level.

PIP (Picture-in-Picture) and

PAP (Picture-and-Picture)

Modes

Press the “ ” button to switch to PIP mode.

At PIP Mode, a small picture (PIP picture) is

displayed on the main picture. There are 1 size

and 4 positions (upper left, upper right, bottom

left and bottom right) available for the PIP

window. You can use “ ” button to change the

PIP position. Aspect Ratio of the PIP window is

ﬁ xed and 4:3.

When PIP Mode is entered, the default active

window is the PIP window and the active window

is indicated by a red frame around it. The active

window can be changed by pressing “

” or “

” button. The status info OSD belongs to active

window. The place of the status OSDs are same

for both windows.

Press the “ ” button again to exit the PIP

mode.

Press the “

” button to switch to PAP mode.

At PAP Mode, two pictures with equal sizes are

displayed on the screen. Aspect Ratios of the

windows are ﬁ xed.

When you switch to PAP Mode, main window in

PIP Mode will be displayed on the right side of

the screen. The active window can be changed

by pressing “ ” or “ ” button.

Press the “

” button again to exit the PAP

mode.

Picture Mode Selection

By pressing PP button, you can change Picture

Mode settings in accordance with your viewing

requirements. Available options are Dynamic,

Natural, Cinema and Pixellence.

Note : This function will not be available while in PC

mode.

Freezing Picture

You can freeze the picture on the screen by

pressing the “ OK ” button on the remote control.

Press the “ OK ” button to freeze picture. Press

again to quit freeze mode.

Zoom Modes

You can change the aspect ratio (image size)

of the TV for viewing the picture in different

zoom modes.

Press “ ” button to directly change the

zoom mode.

Available zoom modes are listed below.

Note:

In YPbPr and HDMI modes, while in 720p-1080i

resolutions, only 16:9 mode is available.

In PC mode, only 16:9 mode is available.

Auto

When a WSS (Wide Screen Signalling) signal,

which shows the aspect ratio of the picture, is

included in the broadcast signal or the signal

from an external device, the TV automatically

changes the ZOOM mode according to the

WSS signal.

• When the AUTO mode does not function

correctly due to poor WSS signal quality or

when you want to change the ZOOM mode,

change to another ZOOM mode manually.

16:9

This uniformly stretches the left and right sides

of a normal picture (4:3 aspect ratio) to ﬁ ll the

wide TV screen.

• For 16:9 aspect ratio pictures that have been

squeezed into a normal picture (4:3 aspect

ratio), use the 16:9 mode to restore the picture

to its original shape.

4:3

Use to view a normal picture (4:3 aspect ratio)

as this is its original size.

MB35_[GB]_SSM_42890W_1050UK_UKIDTV_PLATINIUM1_10062395_50147219.indd 41MB35_[GB]_SSM_42890W_1050UK_UKIDTV_PLATINIUM1_10062395_50147219.indd 41 27.04.2009 11:52:2227.04.2009 11:52:22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo ce42fd90 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info