Bedienungsanleitung Sanyo CE47FD51-B (Seite 38 von 49) (Englisch)

456934

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

English -37 -

Select Dot Clock item by using or

buttons. Use / button to adjust the value.

Phase

Depending on the resolution and scan

frequency that you input to the TV set, you may

see a hazy or noisy picture on the screen. In

such a case you can use this item to get a

clear picture by trial and error method.

Select Phase item by using

or buttons.

Use





button to adjust the value.

No-Signal and Out Of Range Detection

(PC mode)

In PC Mode,as no menu is displayed,in case

that there is no PC input to the TV,it is displayed

an OSD message:

No PC input

then the power lamp turns to amber and PC

will be in PCstandby mode. Press digit buttons

or “P+” / “P-” buttonsto exit standby mode.

In PC Mode,as no menu is displayed,in case

that there is no PC input to the TV, but the

resolution and the vertical frequency is not

supported by the concept, it is displayed an

OSD message:

Out of range

Displaying TV Information

Programme Number, Programme Name,

Sound Indicator and Zoom Mode information

is displayed on the screen when a new

programme is entered or

button is pressed.

Mute Function

Press button to disable sound. Mute

indicator will be displayed in the upper side

of the screen.

To cancel mute, there are two alternatives; the

first one is pressing the

button and the

second one is increasing the volume level.

PIP (Picture-in-Picture) and PAP

(Picture-and-Picture) Modes

Press the button to switch to PIP mode.

At PIP Mode, a small picture (PIP picture) is

displayed on the main picture. There are 1

size and 4 positions (upper left, upper right,

bottom left and bottom right) available for the

PIP window. You can use

button to change

the PIP position. Aspect Ratio of the PIP

window is fixed and 4:3.

When PIP Mode is entered, the default active

window is the PIP window and the active

window is indicated by a white frame around

it. The active window can be changed by

pressing





button. The status info OSD

belongs to active window. The place of the

status OSDs are same for both windows.

Press the

button again to exit the PIP

mode.

Press the

button to switch to PAP mode.

At PAP Mode, two pictures with equal sizes

are displayed on the screen. Aspect Ratios of

the windows are fixed.

When you switch to PAP Mode, Main window

in PIP Mode is displayed on the right side of

the screen. The active window can be

changed by pressing





button.

Press the

button again to exit the PAP

mode.

Source restrictions of PAP Mode are same as

in PIP Mode. It is not possible to show 2 different

channels from the TV tuner at the same time.

NOTE: In all HDMI modes, PIP and PAP are not

visible. In YPbPr 1080i, PIP is not visible.

NOTE: See Appendix B for all PIP/PAT modes.

ENG-47751W-MB26 UK IDTV-1050UK-(WSUB-ALO-2SCRT)(3D PANORAMA)(ECO PIP)(C2)-50110360.p6506.07.2007, 22:1837

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo CE47FD51-B Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info