Bedienungsanleitung Sanyo CES37WSD7-B (Seite 15 von 32) (Englisch)

456933

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

English - 14 -

Timers

You can set a timer to switch the TV to any channel

without your intervention. This is also for making video

recordings of programmes when you are out.

Display the Main Menu by pressing the

"M" button.

Highlight the

Timers line by pressing or button

and press the “SELECT” button to display the Timer

menu.

Main Menu

Channel List

Installation

Configuration

Timers

Language

TV Setup

Common Interface

Up to five separate timer events can be set and each

is displayed in the Timer screen, showing the event

number, the channel to be selected, the start time, end

time, date and the mode - whether that event is active

(and will be acted on) or not.

SELECT

TIMER MENU

No Channel Name Start End Date Mode

1. ITV 1 20:00 21:00 12/05/2005 Active

2. BBC ONE 00:00 00:00 01/01/2005 Inactive

3. BBC ONE 00:00 00:00 01/01/2005 Inactive

4. BBC ONE 00:00 00:00 01/01/2005 Inactive

5. BBC ONE 00:00 00:00 01/01/2005 Inactive

6. BBC ONE 00:00 00:00 01/01/2005 Inactive

Toggle Mode

Exit

Edit Timer More

• To set an event, highlight its mode button using the

or button and press the “SELECT” button to

display the timer entry window.

Name:

Start:

End:

Date:

Mode:

3. ITV 1

00:00

03/06/2005

Once

• Here the five settings of channel name, start time,

end time, date and frequency mode can be set. You

can move freely between each setting using the

or buttons.

• The channel name is set using the

or button to

display the channel which broadcasts the

programme.

• The start time, end time and date are each set with

the digit buttons on the remote control in 24-hour

format.

• The frequency mode determines how often the

receiver operates this event and is set with the

or button to be either Once, Daily, or Weekly.

If an invalid number for the start or end times or the

date is entered, “Entered time is not valid” message

appears on the menu.

If timer action occurs while the TV is watched, the TV

switches to the selected channel. When timer expires,

the TV switches to the channel which it is switched

from.

Selected digital channel will be output via Scart-2. You

should connect your VCR to Scart-2 for recording digital

broadcast.

Language

Some programmes are broadcast in two or more lan-

guages simultaneously. The language heard can be

selected from the Language Menu.

• Press the

"M" button to display the Main Menu and

use

or button to highlight the Language line

and press the “SELECT” button.

Main Menu

Channel List

Installation

Configuration

Timers

Language

TV Setup

Common Interface

• Use the or button to highlight the soundtrack

language required and press the “SELECT” button.

Normal viewing, with the required language

soundtrack, can be resumed by pressing the

"M"

button.

Languages

English

ENG-37781W-1050UK-37 INCH 17MB22 UK IDTV-(2 HDMI-BASIC PIP-SPDIF)(C2)-50115146.p6503.09.2007, 08:2214

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo CES37WSD7-B Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info