Bedienungsanleitung Sanyo CES37WSD7-B (Seite 26 von 32) (Englisch)

456933

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

English - 25 -

Playback NTSC

• Connect NTSC VCR player to a Scart socket of the

TV.

Then, press the “

” button to select EXT1 or EXT2.

Copy Facility

Source selection for VCR recording.

• Select Feature menu.

• Select

SCART 2 Out by pressing





button.

• For copying the picture that comes from the tuner,

select SCART 1.

Camera And Camcorder

To Connect To AV Input

Connect your camera or camcorder to AV input of the

TV.

• Connect your equipment to the TV via

VIDEO (yel-

low),

AUDIO R (red) and AUDIO L (white) inputs.

You must connect the jacks into the input with the

same colour.

To Connect To S-VHS Input

Connect your camera or camcorder S-VHS input of

the TV.

• Connect your equipment to the TV via S-VHS input

and audio inputs of AV inputs by using S-VHS

cables.

Connect The Decoder To The Video

Recorder

Some video recorders have a special Scart socket

for decoder.

• Connect a Scart cable to the Scart socket of your

decoder and to the special Scart socket of your

video recorder. Refer to the booklet of your video

recorder.

Connecting Headphones (optional)

Use the stereo headphone socket of the TV, to con-

nect headphones.

Note: If you want to connect more equipment to your

TV, consult your dealer.

)

Audio Lineout

To connect the external speakers to your TV, use the

Headphone Line Out of the TV. Additionally, turn “Line

out” setting on in the “Sound Menu”.

Note: While watching PC or YPbPr sources, Lineout

selection could only be the current source.

Tips

Care Of The Screen

Clean the screen with a slightly damp, soft cloth. Do

not use abrasive solvents as they may damage the

TV screen coating layer.

Poor Picture

Have you selected the correct TV system? Is your TV

set or house aerial located too close to non-earthed

audio equipment or neon lights, etc.?

Mountains or high buildings can cause double pic-

tures or ghost images. Sometimes you can improve

the picture quality by changing the direction of the

aerial.

Is the picture or Teletext unrecognisable? Check if

you have entered the correct frequency.

The picture quality may degrade when two peripher-

als are connected to the TV at the same time. In such

a case, disconnect one of the peripherals.

No Picture

Is the aerial connected properly? Are the plugs con-

nected tightly to the aerial socket? Is the aerial cable

damaged? Are suitable plugs used to connect the

aerial? If you are in doubt, consult your dealer.

No Picture means that your TV is not receiving a

transmission. Have you selected the correct button

on the remote control?Try once more.

Sound

You can not hear any sound. Did you perhaps inter-

rupt the sound, pressing the

button?

Sound is coming from only one of the speakers.Is the

balance set to one extreme? See

Sound menu.

Remote Control

Your TV no longer responds to the remote control.

Perhaps the batteries are exhausted. If so you can

still use the local buttons at the bottom of the TV.

ENG-37781W-1050UK-37 INCH 17MB22 UK IDTV-(2 HDMI-BASIC PIP-SPDIF)(C2)-50115146.p6503.09.2007, 08:2225

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo CES37WSD7-B Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info