Bedienungsanleitung Sanyo CTL2054 (Seite 10 von 52) (Englisch, Französisch, Spanisch)

33599

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

➀

Input Key—Press to select the program source to

watch: TV signal or signal from DVD or other equip-

ment you have connected to the A/V jacks.

➁

Menu Key—Use this key with the ▲/▼ and – /+ keys

to navigate and adjust features of the on-screen menu

system (see pages 11 ~ 13).

➂

Channel Scanning (CH ▲/▼) and Volume (VOL

– /+) Keys—Press to scan through the channels in

memory and to adjust the volume.

➃

Mute Key—Press once to turn down the volume.

Press again to restore volume to previous level.

➄

Number Keys—Two keys must be pressed to select a

channel. Example: Press 0 then 6 to select channel 6. For

cable channels 100 through 125, press and hold the 1 key

until C1––

appears. Then press the other two numbers.

➅

Caption Key—See page 13.

➆

V-Guide Key—See pages 14 ~ 15.

➇

Reset Key—Press this key twice to restore

factory settings. The TV will automatically start

Channel Search and clear all customized settings.

These features will automatically reset:

•

Picture Controls: Auto, Game, and Manual:

Color, Tint, Contrast, Brightness and

Sharpness

•

Sound Controls: Audio, Bass, Treble, and

Surround

•

Channel Controls: Antenna, CH. Search and

CH. Memory

•

Set Up Controls: Color Enhancer, Aspect

Ratio, and Backlight

•

Caption to OFF

•

V-Guide to OFF

•

Language to English

•

Sleep Timer (if previously set)

•

Video to TV (if previously set)

If desired, personal settings can be made

again using the menu options.

➈

Power Key—Press to turn TV on or off.

➉

Recall Key—Select a channel; select another

channel using the number keys. Press

RECALL to switch between the channels.

Display Key—Press once to display the

Channel number. Press twice to display the

channel number continuously. Press again to

remove the display.

Sleep Key—Press this key then press the “0”

key to set the Sleep Timer. The desired time

can be set from 30 minutes up to 3 hours.

Sleep Timer will switch off the TV

automatically.

Note: The Sleep Timer cancels when the

TV is turned off or if a power failure occurs.

10 Remote Control

MUTE

SLEEP

V-GUIDE

DISPLAY

CAPTION

RECALL

RESETINPUT

POWER

VOL

789

➀

➁

➂

➃

➠

Point towards TV

➄

➆

➅

➈

➉

➇

Using the Remote Control

QuickTips

■

Be sure batteries are

installed correctly.

■

Point the remote

control toward the

TV. Objects between

the remote control

and the TV may

cause misoperation

of the remote control

function.

■

The “C” in front of

the number on your

screen indicates a

cable channel.

■

Adjusting the

volume level: Flash-

ing Right

4arrow

indicates volume is

increasing and Flash-

ing Left

3arrow

indicates volume is

decreasing.

Need help?

Visit our Web site at

www.sanyoctv.com

or Call 1-800-877-5032

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo CTL2054 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info