7
This Plasma television will reproduce a crystal clear Digital picture and exceptional sound.
The signal makes the difference!
1
INITIAL SIGNAL CONNECTIONS
Analog RF Antenna Connection
•
Connect a Cable signal (with or without a cable box),
Satellite Receiver, or RF antenna to the Analog RF
input.
The analog tuner in this Plasma TV receives Analog
Antenna signals, Analog Cable signals, or the RF output
from a Satellite Receiver, VCR, or cable box.
CATV FRANCHISE NOTE: Cable companies, like public
utilities, are franchised by local government authori-
ties. To receive cable programs, even with equipment
which is capable of receiving cable channels, the con-
sumer must subscribe to the cable company’s service.
■ If you move the TV to a new location, press the RESET key
twice after connecting the signal and turning on the TV.
■ TV will automatically select an Antenna mode for the type
of Analog RF signal connected (Antenna or Cable).
■ Use “Antenna Selection” in the Setup menu to change
the Antenna Mode, if necessary, see page 18.
■ When tuned to an analog channel, the TV will switch off
automatically after 15 minutes if there is no signal recep-
tion (cable out or station not broadcasting).
Exception—When the Video mode is selected, the TV will
not automatically switch off when signal reception has
stopped for 15 minutes.
Analog Cable
Analog RF
Antenna
Analog Satellite Receiver
VCR Back
Digital (DTV) RF Antenna Connection
•
Connect an RF Antenna to the Digital Antenna In terminal.
The Digital tuner in this Plasma TV receives
digital
signals
from an external antenna. Digital signals from a STB are
received through the Component In jacks (see page 11).
Digital RF
Antenna
Plasma TV Back
FIRST-THINGS-FIRST
OR
VCR Back
VCR Back
Plasma
TV Back
OR
Plasma
TV Back
Plasma
TV Back
NOTES: If you do not have a VCR, connect signal directly to TV 75 ohm
terminal (UHF/VHF/CATV).
The only resolution available with any of these analog connections,
regardless of the original content, is standard analog (SDTV).
Digital Antenna Input
