Bedienungsanleitung Sanyo DVW7200 (Seite 13 von 44) (Englisch)

30748

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

–

VCR Functions

Hint

• To go back one step, press [s] (during

the steps 3) to 9) ).

ONE TIME PROGRAM

PROGRAM NUMBER 1

DATE 1 0 / 2 4 MON

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

CHANNEL 1 6

REC SPEED – –

5 Select the desired start time

(hour).

Select the minute.

ONE TIME PROGRAM

PROGRAM NUMBER 1

DATE 1 0 / 2 4 MON

START TIME 0 7 : 3 0 – –

END TIME – – : – –– –

CHANNEL – –

REC SPEED – –

ONE TIME PROGRAM

PROGRAM NUMBER 1

DATE 1 0 / 2 4 MON

START TIME 0 7 : 3 0 PM

END TIME – – : – –– –

CHANNEL – –

REC SPEED – –

B PM

Select “AM” or “PM”.

Repeat the procedure in steps

5) and 6) to set the end time.

Select the desired channel.

• If you have connected the unit to a cable

box or satellite box as the Connection A

on page 6, select the VCR to channel 3

or 4 (the RF output channel of the VCR).

Then, select the desired channel at the

cable box or satellite box. Leave the

cable box or satellite box on for timer

recording.

ONE TIME PROGRAM

PROGRAM NUMBER 1

DATE 1 0 / 2 4 MON

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

CHANNEL 1 6

REC SPEED SP

B SP

SLP

Select the desired recording speed.

CLEAR /

C.RESET

1) Press [SUBTITLE/T-SET], then

press [VCR] on the remote control.

2) Select main menu by pressing

[MENU].

3) Press [K] or [L] to select “TIMER

PROGRAMMING”, then press [B].

4) Press [K] or [L] to select the pro-

gram number which you want to

check. The details of the program

you selected will appear on the TV

screen.

• Press [s] or [B] to go to the digit

you want to change, then, press [K]

or [L] to enter correct numbers.

• You may cancel the entire program

by pressing [s] while the program

number flashes.

5) Press [CLEAR/C.RESET] to exit.

6) Press [SUBTITLE/T-SET] to return

to timer stand-by mode.

Press [STOP/EJECT

] on the

unit.

To cancel a Timer Recording

in progress

To Check, Correct or Cancel a

Timer Program

• To set another program after step 9), press

[

. Then, continue with step 2).

• Press [VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR

mode, then press [SUBTITLE/T-SET].

• If a tape is not in the unit or does not have the record tab, the TIMER REC light flashes and Timer Recording cannot be

performed. Please insert a recordable tape.

• When Timer Recordings are set, the TIMER REC light will appear. To use the VCR as usual until the time for the recording,

press [SUBTITLE/T-SET] so that the TIMER REC light disappears. Press [VCR/TV] to select the VCR position. Select

either VCR or DVD mode, then continue with the other features as described in this manual.

After an OTR or a Timer Recording has been set, this unit operates as follows:

• If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape and switches to the DVD mode

automatically. If the DVD power is off, the unit does not switch to the DVD mode but goes into the timer standby mode.

Press [SUBTITLE/T-SET] on the remote control or [STOP/EJECT C/A] on the unit, then press [VCR] to activate the VCR

function again.

• Once the unit turns to the timer standby mode, no VCR functions are available until [SUBTITLE/T-SET] is pressed.

([OUTPUT] on the front panel and [VCR] on the remote control will not function.)

• To cancel the timer standby mode, press [SUBTITLE/T-SET] on the remote control or [STOP/EJECT C/A] on the unit, then

press [VCR] to activate the VCR function again.

• The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after

you cancelled Timer Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you

operate.

When an OTR or a Timer Recording is completed...

• If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically,

and the TIMER REC light on the front panel appears to indicate the unit is in the timer standby mode.

• The TIMER REC light on the front panel flashes if there are no more Timer Recordings on standby.

• If Auto Power Off for DVD has NO

T been activated, the unit switches to the DVD mode and all the VCR function will be

unavailable. The TIMER REC light will not appear as long as the DVD is in use. All the DVD functions are available during

OTR, timer standby mode and Timer Recording.

If you want to use the DVD player during a timer recording or while the TIMER REC light appears or flashes...

• Press [POWER] to turn on the DVD. Press [DVD] on the remote control to select DVD mode, then continue with the other

DVD features as described in this manual.You don’t need to set the TIMER off to use the DVD player.

NOTE (for Timer Recording) :

• If there is a power failure or the unit is unplugged for more than 30 seconds, clock and all timer settings will be lost.

Hints for OTR and Timer Recording

• The TIMER REC light on

the front panel appears.

The unit will change to

the DVD mode.

SUBTITLE

T-SET

H9880UD(EN).qx3 05.1.17 17:30 Page 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo DVW7200 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info