Bedienungsanleitung Sanyo DWM450 (Seite 16 von 38) (Englisch)

30750

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

SETUP MENU

AUDIO SUBTITLE RANDOM ZOOM

PROGRAM

REV PLAY FWD

NEXTPREV

SLOW

ON OPEN/CLOSE

123

+10

STOP

VIDEO 1

-E15-

Preparations

• Turn on the power (TV, Audio System, AV amplifier, etc.).

• Select the video input source on your television.

(Please refer to your TV instruction manual.)

• Select the playback picture size according to the aspect

ratio of the TV. (For more details, see “Setting Display” on

page E32.)

• Select the audio input source (Audio System, AV amplifier,

etc.).

• When you use TV with Progressive-scan capability and

connect it to the COMPONENT VIDEO OUT jacks of

the DVD video player (see page E10), you must select

the PROGRESSIVE mode. (For more details, please

refer to your TV instruction manual.)

1. Turn on the power (TV and DVD video player).

2. In “NO DISC” mode, press and hold down [a] on the

DVD video player until “

” (PROGRESSIVE) ap-

pears briefly on the TV screen.

If you want to change the setting again, press and

hold down [a] on the DVD video player until “

”

(INTERLACE) appears briefly on the TV screen.

Note:

In “

” mode, the closed caption may not appear

on the TV screen.

BASIC OPERATION

For 5-inch (12cm) disc For 3-inch (8cm) disc

Basic Playback

Notes:

• Do not touch the disc tray while it is moving.

• Never place anything except a disc on the disc tray. For-

eign objects can damage the unit.

• Do not apply excessive force to the disc tray.

• Only one disc must be placed on the disc tray at a time.

When operation buttons are pressed, that operation is dis-

played on the TV screen. The display turns off after several

seconds.

4:3 LB 4:3 PS 16:9 :

(Letterbox): (Panscan):

Important Note:

• This instruction manual explains the basic instruction

of this unit using the remote control.

• Some DVD video discs have different functions that may

not be explained in this instruction manual. You may

need extra instruction. In this case, please follow the

instructions displayed on the TV screen or jacket or case

of the disc.

•“

” may appear on the TV screen during operation.

This icon means that the function is not available on the

disc now.

1. Press [z/ON].

• “SANYO” logo appears on the TV screen.

• The power indicator lights on the front panel.

2. Press [q] (or [ q OPEN/CLOSE] on the remote control).

•“q” appears on the TV screen and the disc tray opens.

• The DISC IN indicator blinks on the front panel.

Note:

To open or close the disc tray, be sure to press [q] (or

[ q OPEN/CLOSE] on the remote control). Do not push

back the disc tray by your hand.

3. Place the disc with the label facing up on the disc tray.

Note:

If you use a Conventional TV, skip this section.

Disc tray

qaz/ON

z/ON

OPEN/

PLAY

DWM-450-US - English 3/16/05, 3:58 PM16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo DWM450 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info