Bedienungsanleitung Sanyo DWM4500 (Seite 40 von 44) (Englisch)

19042

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

-E39-

To turn the unit on and listen to the last received station, press

[TUNER] on the remote control.

Preparation

Press [FUNCTION] to select “FM TUNER”.

Note: This unit doesn't have “AM TUNER”.

Automatic/Manual Tuning

Automatic tuning

Press [TUNE] + or - for at least 1 second to tune in a station. The

unit will scan up or down the band and receive the next receivable

station. Press the button again to continue.

Manual tuning

Press [TUNE] + or - briefly until the desired frequency is displayed.

The frequency changes in 200 kHz steps for FM.

Example:

To Preset Stations

Up to 24 FM stations can be preset.

Automatic presetting (APT)

Press [PROGRAM/RANDOM] for at least 3 seconds.

“PROG.” blinks.

The automatic tuning mode is set and automatic presetting

begins from the low end of the band.

When 24 FM stations have been preset or the high end of the

band is reached, automatic presetting stops. “PROG.” disappears

and the station memorized on the preset number 1 will be heard.

Note:

If APT is activated, all previously programmed stations of the

band will be cleared and new stations will be programmed.

Manual presetting

1. Tune in the station to be preset as described in “Automatic/

Manual Tuning”.

2. Press [PROGRAM/RANDOM]. “PROG.” blinks.

LISTENING TO THE RADIO (FM ONLY)

Listening to Preset Stations

Preset tuning

Press [PRESET] + or - briefly to select the desired channel.

• If using the number buttons, press the number button(s), then

press [ENTER].

Preset scan tuning

1. Press [PRESET] + or - for at least 1 second.

• The preset number appears.

• The preset stations are selected in sequence for

approximately five seconds each.

2. Press [n] when the desired station has been selected. Preset

scanning will stop.

When beat interference is heard

A high-pitched noise called “beat” is sometimes heard during

reception of radio broadcasts.

If this occurs, while holding [ON SCREEN] down on the remote

control, press [e] on the main unit to select “bc-A” or “bc-B”.

Select the setting that gives the best results.

To receive FM stereo broadcasts

Make sure that “MONO” is not displayed. If “MONO” appears,

press [FM MODE] to turn the “MONO” indication off.

You can enjoy FM stereo sound when an FM stereo broadcast

is received.

• If the signal from an FM stereo station is weak and reception

is poor, press [FM MODE] to change to monaural (MONO)

reception. The reception may be improved, but the sound

will be monaural.

Changing the reception frequencies

If necessary, use the following procedure to change the

reception frequencies.

While holding [ON SCREEN] down on the remote control,

press [f] on the main unit.

To return the original setting, repeat steps above.

87.9 ~ 107.9 MHz 87.5 ~ 108.0 MHz

(200 kHz steps) (50 kHz steps)

3. While “PROG.” is blinking, press [PRESET] + or - to select

the number to be preset.

• The number buttons on the remote control can also be

used.

• In this example, the preset number is “9”.

4. While it is blinking, press [PROGRAM/RANDOM].

• In this example, “103.1 MHz” FM station is preset on the

preset number 9.

5. Repeat steps above to add more preset stations.

• When presetting a new station, the previous preset station is

cleared.

(Stop)

FUNCTION

– PRESET +

f, e

ON SCREEN

– TUNE +

ENTER

PROGRAM

/RANDOM

Number

buttons

FM MODE

TUNER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo DWM4500 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info