Bedienungsanleitung Sanyo PDG-DET100L (Seite 62 von 92) (Englisch)

470265

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Maintenance and Care

Filter Instructions

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes

clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup

and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to

replace the filter easily. The projector monitors the condition of the filter at all time and replaces a filter with a

new one automatically when it detects the clogging.

If the projector reaches a time set in the timer setting (p.61),

a Filter replacement icon (Fig.1) appears on the screen and

the WARNING FILTER indicator on the top panel lights up

(p.79). When you see this icon, replace the filter as soon

as possible (pp.31, 56). If the filter is out of scroll and the

projector reaches a time set in the timer setting, Fig. 2

appears on the screen, indicating that the filter cartridge

replacement is necessary.

When the filter scroll is counted down to 1, the Last scroll

icon (Fig.3) appears on the screen, indicating that there is

one scroll left in the filter cartridge (p.61).

If the projector detects that the filter is clogged and no scroll

is left in the filter cartridge, a Filter cartridge replacement

icon (Fig. 4) appears on the screen and the WARNING

FILTER indicator on the top panel lights up (p.79). When you

see this icon, replace the filter cartridge (p.63) and reset the

Filter counter (p.64) and the Scroll counter (p.64).

When the filter is being scrolled by the remote control (p.31)

or the Filter control function in the setting menu (p.56), a

Filter replacement icon and “Please wait...” message (Fig.5)

appear on the screen and the WARNING FILTER indicator

blinks slow (approx. 2 seconds ON, 2 seconds OFF) (p.77).

The WARNING FILTER indicator blinks fast when the

projector detects an abnormal condition, the filter cartridge

is not installed properly, or the filter scroll is not working

properly (p.79).

Fig.1 Filter replacement icon

Fig.4 Filter cartridge replacement icon

Fig.3 Last scroll icon

✔Note:

• Fig.1, Fig.2, Fig.3 or Fig. 4 will not appear when the Display

function is set to “Off” (p.49), or during “Freeze” (p.30).

• The filter cannot be rewound.

• The filter can be scrolled 9 times since the filter cartridge has

10 scrolls.

• The filter cartridge is disposable. Do not clean and reuse the

filter cartridge.

• Do not expose the filter cartridge to water or liquid, or it may

cause a breakdown.

• Replace the filter cartridge after all the scroll is used up. If you

replace the filter cartridge when there are some scrolls left in

the filter cartridge, the filter counter and the scroll counter do

not recognize the correct number of remaining scrolls and the

reset function cannot work properly. It may cause a breakdown.

• The used part of the filter can be seen on the edge of the Filter

cartridge after scrolling the filter, but there is no problem for the

use of the projector.

Fig.5 Filter replacement icon and

“Please wait...” message.

• Do not use the filter cartridge with other projector. The filter

counter and the scroll counter do not recognize the correct

number of remaining scrolls of the used filter cartridge and the

reset function cannot work properly. It may cause a breakdown.

• Make sure that the projection lamps are turned off when you

are replacing the filter cartridge. If you replace the filter cartridge

when the projection lamps are turned on, the projector will be

shut down automatically for safety purposes.

• Do not forget to reset the filter counter and the scroll counter in

the setting menu after replacing the filter cartridge. If you forget

to reset the filter counter and the scroll counter, the projector

cannot recognize the correct number of remaining scrolls and it

may cause a breakdown.

• When the projector is kept used for 3 minutes without getting

the filter cartridge replaced after the Fig.4 appears on the screen,

the projector is turned off automatically to prevent the damage of

optical components.

Fig.2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo PDG-DET100L Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sanyo PDG-DET100L

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info