Bedienungsanleitung Sanyo pdg dht100l (Seite 24 von 90) (Englisch)

215931

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

Turning On the Projector

Connect the projector’s AC power cord into an AC

outlet and turn on the MAIN ON/OFF Switch. The

LAMP indicator lights red and the POWER indicator

lights green.

Press the ON/STAND-BY button on the side control

or on the remote control. The LAMP indicator

dims red and the cooling fans start to operate. The

preparation display appears on the screen and the

countdown starts.

The preparation display will disappear after 20

seconds.

After the countdown, the input source that was

selected the last time and the Lamp status icon

(see page 65) appear on the screen.

If the projector is locked with a PIN code, PIN code

Input Dialog Box will appear. Enter the PIN code as

instructed below.

Selected Input Source and Lamp control

Complete peripheral connections (with a computer,

VCR, etc.) before turning on the projector.

What is PIN code?

PIN (Personal Identification Number) code is a security

code that allows the person who knows it to operate the

projector. Setting a PIN code prevents unauthorized use

of the projector.

A PIN code consists of a four-digit number. Refer to the

PIN code lock function in the Setting Menu on pages 58-

59 for locking operation of the projector with your PIN

code.

PIN code Input Dialog Box

Enter a PIN code

CAUTION ON HANDLING PIN CODE

If you forget your PIN code, the projector can no

longer be started. Take special care in setting a

new PIN code; write down the number in a column

on page 86 of this manual and keep it on hand.

Should the PIN code be missing or forgotten,

consult your dealer or service center.

After the OK icon

disappears, you can

operate the projector.

Lamp status

See page 65 for the Lamp mode status

✔Note:

• The Lamp replacement icon and the Filter warning

icon may appear on the screen depending on the

usage state of the projector.

Use the Point ed buttons on the side control or on the

remote control to enter a number. Press the Point 8

button to fix the number and move the red frame pointer

to the next box. The number changes to “✳.” Repeat

this step to complete entering a four-digit number. After

entering the four-digit number, move the pointer to “Set.”

Press the SELECT button so that you can start to operate

the projector.

If you fixed an incorrect number, use the Point 7 button

to move the pointer to the number you want to correct,

and then enter the correct number.

If you entered an incorrect PIN code, “PIN code” and the

number (✳✳✳✳) will turn red for a moment. Enter the

correct PIN code all over again.

✔Note:

• When the Logo select function is set to “Off,” the

logo will not be shown on the screen (p.54).

• When the “Countdown off” or “Off” is selected

in the Display function, the countdown will not be

shown on the screen (p.49).

• During the countdown period, all operations

except for Zoom, Focus, and Lens-shift functions

are invalid. If the projector has been locked with a

PIN code, however, Zoom, Focus, and Lens-shift

functions are also invalid.

• If you press the ON/STAND-BY button on the side

control or the remote control during the countdown

period, you can skip the countdown and go to the

normal operations.

• If the PIN code number is not entered within three

minutes after the PIN code dialog box appeared,

the projector will be turned off automatically.

• The “1234” is set as the initial PIN code at the

factory.

Basic Operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo pdg dht100l Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sanyo pdg dht100l

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info