Bedienungsanleitung Sanyo PDG-DXT10L (Seite 4 von 135) (Englisch)

489560

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

Safety Instructions

All the safety and operating instructions should be read

before the product is operated.

Read all of the instructions given here and retain them for

later use. Unplug this projector from AC power supply

before cleaning. Do not use liquid or aerosol cleaners.

Use a damp cloth for cleaning.

Follow all warnings and instructions marked on the pro-

jector.

For added protection to the projector during a lightning

storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet. This will

prevent damage due to lightning and power line surges.

Do not expose this unit to rain or use near water... for

example, in a wet basement, near a swimming pool,

etc...

Do not use attachments not recommended by the manu-

facturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or

table. The projector may fall, causing serious injury to a

child or adult, and serious damage to the projector. Use

only with a cart or stand recommended by the manufac-

turer, or sold with the projector. Wall or shelf mounting

should follow the manufacturer’s instructions, and should

use a mounting kit approved by the manufacturers.

An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven sur-

faces may cause the appliance and cart

combination to overturn.

Slots and openings in the back and bottom of the cabinet

are provided for ventilation, to ensure reliable operation

of the equipment and to protect it from overheating.

The openings should never be covered with cloth or

other materials, and the bottom opening should not be

blocked by placing the projector on a bed, sofa, rug, or

other similar surface. This projector should never be

placed near or over a radiator or heat register.

This projector should not be placed in a built-in installa-

tion such as a bookcase unless proper ventilation is

provided.

Never push objects of any kind into this projector through

cabinet slots as they may touch dangerous voltage points

or short out parts that could result in a fire or electric

shock. Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of air-

conditioning equipment.

This projector should be operated only from the type of

power source indicated on the marking label. If you are

not sure of the type of power supplied, consult your au-

thorized dealer or local power company.

Do not overload wall outlets and extension cords as this

can result in fire or electric shock. Do not allow anything to

rest on the power cord. Do not locate this projector where

the cord may be damaged by persons walking on it.

Do not attempt to service this projector yourself as open-

ing or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified

service personnel.

Unplug this projector from wall outlet and refer servicing

to qualified service personnel under the following condi-

tions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the projector.

c. If the projector has been exposed to rain or water.

d. If the projector does not operate normally by follow-

ing the operating instructions. Adjust only those

controls that are covered by the operating instruc-

tions as improper adjustment of other controls may

result in damage and will often require extensive

work by a qualified technician to restore the projector

to normal operation.

e. If the projector has been dropped or the cabinet has

been damaged.

f. When the projector exhibits a distinct change in per-

formance-this indicates a need for service.

When replacement parts are required, be sure the ser-

vice technician has used replacement parts specified by

the manufacturer that have the same characteristics as

the original part. Unauthorized substitutions may result in

fire, electric shock, or injury to persons.

Upon completion of any service or repairs to this projec-

tor, ask the service technician to perform routine safety

checks to determine that the projector is in safe operating

condition.

oor de

klant

en in

Neder

land

Bij dit produkt zijn batt e rijen ge-

leverd.

Wanneer dezeleeg zijn, moet u ze

niet weggooien maar inleveren als

KCA.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo PDG-DXT10L Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sanyo PDG-DXT10L

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info