Bedienungsanleitung Sanyo PLC HP7000L (Seite 24 von 98) (Englisch)

598874

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

Basic Operation

What is PIN code?

PIN (Personal Identification Number) code is a security

code that allows the person who knows it to operate the

projector. Setting a PIN code prevents unauthorized use of

the projector.

A PIN code consists of a four-digit number. Refer to the

PIN code lock function in the Setting Menu on pages 65-66

for locking operation of the projector with your PIN code.

Press the ON/STAND-BY button on the side control

or the STAND-BY button on the remote control, and

Power off? appears on the screen.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE

YOU TURN THE PROJECTOR ON, WAIT AT

LEAST FIVE MINUTES BEFORE TURNING IT

OFF.

When the projector has cooled down enough, the

POWER indicator lights green and then you can turn

on the projector. To unplug the AC power cord, wait

until the projector is completely cooled down.

Power off? disappears after 4 seconds.

Note:

 •WhentheDirectOnfunctionisset

toOn,theprojectorwillbeturnedon

automaticallybyconnectingtheAC

powercordtoanACoutlet(p.63).

 •Therunningspeedofcoolingfansis

changedaccordingtothetemperature

insidetheprojector.

 •Donotputtheprojectorinacase

beforetheprojectoriscooledenough.

 •IftheWARNINGTEMP.indicator

blinksred,see“WarningIndicators”on

page77.

 •Theprojectorcannotbeturnedon

duringthecoolingperiodwiththe

POWERindicatorturnedoff.Youcan

turnitonagainafterthePOWER

indicatorbecomesgreenagain.

DO NOT OPERATE THE PROJECTOR

CONTINUOUSLY WITHOUT REST.

CONTINUOUS USE MAY RESULT IN

SHORTENING THE LAMP LIFE. TURN OFF THE

PROJECTOR AND LET IT STAND FOR ABOUT

AN HOUR IN EVERY 24 HOURS.

Turning Off the Projector

You can disconnect the power cord from the wall outlet

or turn off the breaker even during projection without

pressing the ON/STAND-BY button.



Note:

WhenusingtheDirectOFFfunction,youcannot

restarttheprojectorimmediatelyafterthepoweris

disconnected.Iftheexternalpowersupplyissuddenly

cutoff,thefanstopsimmediately.Thelampremains

hightemperatureandneedstobecooled.

Direct OFF Function

CAUTION ON HANDLING PIN

CODE

If you forget your PIN code, the

projector can no longer be started.

Take a special care in setting a

new PIN code; write down the

number in a column on page 93 of

this manual and keep it on hand.

Should the PIN code be missing

or forgotten, consult your dealer or

service center.

Press the ON/STAND-BY button on the side control or

the STAND-BY button on the remote control again to

turn off the projector. The LAMP/SHUTTER indicator

lights bright and the POWER indicator turns off. After

the projector is turned off, the cooling fans operate for

90 seconds. You cannot turn on the projector during

this cooling down period.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo PLC HP7000L Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info