Bedienungsanleitung Sanyo plc wxe45 (Seite 18 von 71) (Englisch)

216253

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

Connecttheprojector’sACpowercordintoanAC

outlet.ThePOWERindicatorturnsred.Openthelens

cover.

PressthePOWERON/STAND-BYbuttononthe

remotecontrol.ThePOWERindicatorbecomesgreen

andthecoolingfansstarttooperate.Thepreparation

displayappearsonthescreenandthecountdown

starts.

Thepreparationdisplaydisappearsafter30seconds.

Afterthecountdown,theinputsourcethatwas

selectedthelasttimeandtheLampmodestatusicon

(seepage46)willappearonthescreen.

IftheprojectorislockedwithaPINcode,aPINcode

InputDialogBoxappears.EnterthePINcodeas

instructedbelow.

Seepage46fortheLampmode.

Video

Selected Input Source and Lamp Mode

Completeperipheralconnections(withacomputer,

VCR,etc.)beforeturningontheprojector.

Lampmodestatus

AftertheOKicon

disappears,youcan

operatetheprojector.

PIN Code Input Dialo� Box

Turnin� On the Projector

Enter a PIN code

SelectanumberbypressingthePoint▲▼buttons,and

thenpressthePoint►buttontofixthenumberandmove

thepointer.Thenumberchangesto"".Ifyoufixedan

incorrectnumber,movethepointertothenumberyouwant

tocorrectbypressingthePoint◄button,andthenselect

thecorrectnumberbypressingthePoint▲▼buttons.

Repeatthissteptocompleteenteringafour-digitnumber.

"1234"issetastheinitialPINcodeatthefactory.

Afterenteringthefour-digitnumber,movethepointerto

"Set"bypressingthePoint►button.PresstheSELECT

buttonsothatyoucanstarttooperatetheprojector.

IfyouenteredanincorrectPINcode,"PINcode"andthe

number()turnsred.EnterthecorrectPINcodeall

overagain.

What is PIN code?

PIN(PersonalIdentificationNumber)codeisasecuritycode

thatallowsthepersonwhoknowsittooperatetheprojector.

SettingthePINcodepreventsunauthorizeduseofthe

projector.

APINcodeconsistsofafour-digitnumber.RefertothePIN

codelockfunctionintheSettingMenuonpages47–48for

lockingoperationoftheprojectorwithyourPINcode.

Note:

• When the Input Search function is set on

On1 or On2, the input signal will be searched

automatically (p.44).

• When the Logo select function is "Off,” the

logo will not be displayed on the screen

(p.42).

• When the "Countdown off" or "Off" is selected

in the Display function, the countdown will not

be shown on the screen (p.41).

• During the countdown period, all operations

are invalid.

• If the PIN code number is not entered within

three minutes after the PIN code dialog box

appeared, the projector will be turned off

automatically.

• The “1234” is set as the initial PIN code at the

factory.

CAUTION ON HANDLING THE PIN CODE

If you forget your PIN code, the projector can no

longer be started. Take a special care in setting a

newPIN code; write down the number ina column

on page 70 of this manual and keep it on hand.

ShouldthePINcodebemissingorforgotten,consult

yourdealerorservicecenter.

PIN code

Basic Operation

Note:

The Filter warning and Lamp replacement

icons may appear on the screen depending on

the usage state of the projector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo plc wxe45 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info