489448
26
Zoom out
Zoom in
Vorherige Seite
1/77
Nächste Seite
Basic Operation
Remote Control
D.ZOOM
buttons
NO SHOW
button
AUTO PC
button
Note:
See the previous page for the description
of other buttons.
KEYSTONE button
(See page 24.)
POINT ed
buttons
black out the captured image normal ➜
• • • • •
Press the NO SHOW button to black out the image. To
restore to normal, press the NO SHOW button again or
press any other button. When the projected image is
captured and is set as “User” in the Logo selection (p.47),
the screen changes each time you press the NO SHOW
button as follows.
“No show” disappears after 4 seconds.
NO SHOW button
Press the AUTO PC button to operate the Auto PC function.
See page 29 for more details.
AUTO PC button
Press the D.ZOOM buttons to zoom in and zoom out the
images. See page 36 for more details.
D.ZOOM buttons
Press the P-TIMER button. The timer display “00:00”
appears on the screen and the timer starts to count time
(00:00–59:59).
To stop the P-Timer, press the P-TIMER button. Press the
P-TIMER button again, then the P-Timer display disappears.
P-TIMER button
P-Timer display
Press the IMAGE button to select an image level of the
screen. See pages 32, 40 for more details.
IMAGE button
LAMP CONTROL
button
P-TIMER button
IMAGE button
Press the LAMP CONTROL button to select the lamp mode
to change the brightness of the screen.
Normal … Normal brightness
Auto …… Brightness according with the input signal
Eco …… Lower brightness reduces the lamp power
consumption and extends the lamp life.
For details, see page 24.
KEYSTONE button
26
LAMP CONTROL button
CEILING
button
Press the CEILING button to reverse the top/bottom and
left/right of image (p49).
CEILING button
Press the COMPUTER, NETWORK, VIDEO, S-VIDEO, or
COMPONENT button to select an input source. See pages
27, 37-38 for more details. Refer to the owner's manual
“Network Set-up and Operation” for details about the
network input.
COMPUTER/NETWORK/VIDEO/S-VIDEO/
COMPONENT buttons
Remote Control
COMPUTER 1/2 buttons
NETWORK button
COMPONENT button
S-VIDEO button
VIDEO button
Note:
When the COMPUTER 2 button is
pressed, if Monitor Out is selected at
the Terminal setting, “Monitor out” is
displayed on the screen. (p.49)
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sanyo PLC-XL51 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info