Bedienungsanleitung Sanyo plc xp100l (Seite 39 von 81) (Englisch)

214883

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

Screen Size Adjustment

Select the desired screen size that conforms to the input signal source.

Press the MENU button to display the On-Screen Menu. Use

the Point 7 8 buttons to move the red frame pointer to the

Screen Menu icon.

Use the Point ed buttons to move the red frame pointer to

the desired function and then press the SELECT button.

Normal

SCREEN MENU

Provide the image at the normal computer aspect ratio of 4:3.

Wide

True

Provide the image in its original size. When the original image size

is larger than the screen size (1024 x 768), the projector enters to

the panning mode automatically. Use the Point ed7 8 buttons

to pan the image. When adjusted, the arrows will turn red. When

reached to the correction limits, the arrows will disappear.

Provide the image to fit the wide video aspect ratio (16:9) by

expanding the image width uniformly. This function can be used to

provide the squeezed video signal at 16:9.

Full screen

Provides the full screen image.

Screen Menu icon

Move the red frame pointer to the desired

function and press the SELECT button.

Scale H/V .............. Adjust the Horizontal/Vertical screen scale.

H&V ...................... When set to “On,” the aspect ratio is fixed.

The “Scale V” appears dimmed and becomes

unavailable. Adjust “Scale H,” then the screen

scale is automatically modified based on the

aspect ratio.

Position H/V .......... Adjust the Horizontal/Vertical screen position.

Common .............. Save the adjusted scale to all the inputs.

Press the SELECT button at Common to

display a confirmation box. To save the scale,

press the SELECT button at “Yes.” When

Custom is selected, the saved scale is used.

Reset .................... Reset the all adjusted values. Press the

SELECT button at Reset to display a

confirmation box. To reset, press the SELECT

button at “Yes.”

Custom

✔Note:

• When no signal is detected, “Normal” is

set automatically and the Aspect dialog box

disappears.

• The adjustable range for Scale H/V and Position

H/V is limited depending on the input signal.

Press the SELECT button at Common or

Reset, to display a confirmation box.

Computer Input

Adjust the screen scale and position manually with this function.

Press the SELECT button at Custom and the “Custom” is displayed

on the screen for a few seconds. To display the Aspect dialog box,

press the SELECT button at Custom again and then the Aspect

dialog box appears.

✔Note:

• The projector cannot display any resolution

higher than 1600 x 1200. If your computer’s

screen resolution is higher than 1600 x 1200,

lower the resolution before connecting the

projector.

• The image data other than XGA (1024 x 768) is

modified to fit the screen size in initial mode.

• True, Full screen, and Digital zoom +/– cannot

be selected when no signal is detected in the PC

System Menu. (p.34)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo plc xp100l Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sanyo plc xp100l

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info