569861
58
Zoom out
Zoom in
Vorherige Seite
1/75
Nächste Seite
58
Maintenance and Cleaning
Turn off the projector, and disconnect the AC power
cord from the AC outlet.
Remove the air filter by pulling the latch horizontally.
Air filter prevent dust from accumulating on the optical elements inside the projector. Should the air filter
become clogged with dust particles, it will reduce cooling fans' effectiveness and may result in internal heat
build up and adversely affect the life of the projector. Clean the air filter following the steps below.
Clean the air filter with a brush or rinse it softly.
When cleaning the air filter by rinsing, dry it well.
Replace the air filter properly. Make sure that the air
filter is fully inserted.
CAUTION
Do not operate the projector with the air filter
removed. Dust may accumulate on the optical
elements degrading picture quality.
Do not put anything into the air intake vent. It may
result in malfunction of the projector.
RECOMMENDATION
W e r e c o m m e n d a v o i d i n g d u s t y / s m o k y
environments
when operating the projector. Usage
in these environments may cause a poor image
quality.
When using the projector under dusty or smoky
conditions, dust may accumulate on a lens, LCD
panels, or optical elements inside the projector. This
condition may degrade the quality of a projected image.
When the symptoms above are noticed, contact your
authorized dealer or service station for proper cleaning.
Cleaning the Air Filter
1
2
3
4
Air filter
Pull horizontally and remove.
When moving this projector or while not using it over an
extended period of time, replace the lens cover.
Attach the lens cover according to the following
procedures.
Pass the string through a hole of the lens cover.
Turn over the projector and remove the screw with a
screwdriver.
Attaching the Lens Cover
Attach the string with lens cover to a hole at the
bottom of the projector and secure it with a screw.
1
2
3
Lens Cover
String for the lens cover
Secure it to the hole
with a screw.
Hole
Maintenance and Cleaning
58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sanyo PLC-XW60 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sanyo PLC-XW60

Sanyo PLC-XW60 Bedienungsanleitung - Deutsch - 75 seiten

Sanyo PLC-XW60 Bedienungsanleitung - Holländisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info