Bedienungsanleitung Sanyo Pro 200 (Seite 2 von 3) (Englisch)

596978

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

Charging the Battery

Charge your battery as soon as possible so you can

begin using your phone. Keeping track of your

battery’s charge is important. If your battery level

becomes too low, your phone automatically

turns off, and you will lose any information you

were just working on. For a quick check of your

battery level, glance at the battery charge indicator

located in the upper-right corner of your phone’s

display screen. If the battery charge is getting

too low, the battery icon ( ) appears and the

phone displays awarning message.

Using the Phone Charger

1. Plug the phone charger into an electrical outlet.

2. Open the micro-USB connector cover located

on the lower left side of your phone.

3. Plug the other end of the phone charger into the

micro USB connector.

• A red indicator light means the battery

is charging.

• A green indicator light means the

battery charging is complete.

The battery, can be recharged the before it

becomes completely run down.

Making and Answering Calls

Holding Your Phone

To maximize performance, do not obstruct the

internal antenna area. Also make sure you do not

cover the microphone with your hand while talking.

Making Phone Calls

Placing a normal phone call from your wireless

phone is as easy as making a call from any

landline phone. Enter the number, press TALK,

and you’re on your way to clear calls.

To make a call using your keypad:

1. Make sure your phone is on.

2. Enter a phone number from standby mode. (If

you make a mistake while dialing, press BACK to

erase the numbers.)

3. Press TALK.

4. Press END or close the phone when you are nished.

To place a call with the phone closed:

1. Make sure your phone is on and the Side Key

Guard feature is disabled.

2. Press and hold the volume on the right side of

the phone.

3. Follow the system prompts. (The call will be

made in speakerphone mode unless you have a

headset attached to the phone.)

•Say the name of your registered

Voice Dial entry.

You can also place calls from your phone by speed

dialing numbers from your Contacts and using

your History listings.

Answering Phone Calls

To answer an incoming call with the phone open:

1. Make sure your phone is on. (If your phone is off,

incoming calls go to voicemail.)

2. Press TALK to answer an incoming call.

(Depending on your settings, you may also answer

incoming calls by opening the phone or by pressing

any number key.)

To answer an incoming call with the phone closed:

1. Make sure your phone is on. (If your phone is off,

incoming calls go to voicemail.)

2. When your phone rings or vibrates, press the side

call key (volume) on the right side of the phone.

(The call will be answered in speakerphone mode.)

– or –

Open the phone to use the earpiece.

Your phone noties you of incoming calls in the

following ways:

• The phone rings or vibrates.

• The indicator light ashes.

• The backlight illuminates.

• The screen displays an incoming call message.

If the incoming call is from a number stored in your

Contacts, the entry’s name is displayed. The caller’s

phone number may also be displayed, if available.

Turning Bluetooth On & Off

By default, your device’s Bluetooth feature is

turned off. Turning Bluetooth on makes your phone

“discoverable”by other in-range Bluetooth devices.

To make your phone visible to other devices you

must also ensure that your phone’s visibility is not

set to Hidden.

• The built-in Calendar offers several personal

information management features to help you

manage your busy lifestyle.

• T9 Text Input lets you quickly type messages with

one keypress per letter.

• Speed dial lets you dial phone numbers with one

keypressor two keypresses.

• The built-in Bluetooth technology allows you to

connect wirelessly to a number of Bluetooth devices to

share information more easily than ever before.

• Your phone allows you to run multiple applications

simultaneously.

Turning Your Phone On and Off

Turning Your Phone On

• Press END

Once your phone is on, it may display “Looking for

service...,” When your phone nds a signal, it

automatically enters standby mode – the phone’s idle

state. At this point, you are ready to begin making and

receiving calls. If your phone is unable to nd a signal

after ve seconds of searching, a Power Save feature is

automatically activated. When a signal is found, your

phone automatically returns to standby mode.

In Power Save mode, your phone searches for a signal

periodically without your intervention. You can also

initiate a search for service by pressing any key

(when your phone is turned on).

Turning Your Phone Off

Press and hold END for two seconds until you

see the powering down animation on the display

screen.Your screen remains blank while your

phone is off (unless the battery is charging).

Battery Capacity

Your phone is equipped with a Lithium Ion

(Li-Ion) battery. It allows you to recharge your

battery before it is fully drained. The battery

provides up to 4.9 hours of continuous digital

talk time. When there are approximately two

minutes of talk time left, the phone sounds an

audible alert and then turns off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo Pro 200 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info