Bedienungsanleitung Sanyo SAP-KRV96EH (Seite 62 von 65) (Englisch)

639747

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

USING THE 1-HOUR OFF

TIMER

1. 1-Hour OFF Timer

This function causes the unit to operate for one hour and

then stop, regardless of whether the unit is on or off when

this button is pressed.

The indicator in the display indicates that this function is

operating.

Setting procedure:

Regardless of whether the unit is operating or stopped, press the

1 HR. TIMER button.

appears in the display.

Cancellation procedure:

Press the ON/OFF operation button to turn the unit off, wait for the

unit to stop operating, and then press the ON/OFF operation

button again.

The 1-Hour Timer function is now cancelled and the unit operates

normally.

• If, while the 1-Hour Timer function is operating, the 1HR. TIMER

button is pressed once to cancel the function and then again, the

unit continues to operate for one hour from that point in time and

then stops.

• It is not possible to use the OFF Timer and 1-Hour OFF Timer

together. Whichever function is set last takes precedence. If the

1 HR. TIMER button is pressed while the TIMER OFF function

operates, the OFF Timer is cancelled and the unit will stop

operating one hour later.

2. Operation together with the daily ON/OFF

repeat timer

The 1-Hour OFF Timer setting is given priority over the DAILY ON/

OFF REPEAT setting.

TIPS FOR ENERGY SAVING

Do not

• Block the air intake and outlet of the unit. If they are

obstructed, the unit will not work well, and may be

damaged.

• Let direct sunlight into the room. Use sunshades, blinds or

curtains. If the walls and ceiling of the room are warmed by the

sun, it will take longer to cool the room.

• Always try to keep the air filter clean. (Refer to “CARE AND

CLEANING”.) A clogged filter will impair the performance of the

unit.

• To prevent conditioned air from escaping, keep windows, doors

and any other openings closed.

ADJUSTING THE AIRFLOW

DIRECTION

1. Horizontal

The horizontal airflow can be adjusted by moving the vertical

vanes with your hands to the left or right.

When the humidity is high, the vertical vanes should be in the

front position during the cooling or dehumidifying operation.

If the vertical vanes are positioned all of the way to the right

or left, condensation may begin to form around the air vent

and drip down.

2. Vertical

The vertical airflow can be adjusted by moving the flap with the

remote control unit. Do not move the flap with your hands. Confirm

that the remote control unit has been turned on. Use the FLAP

button to set either the sweep function or one of the six airflow

direction settings.

• The flap automatically closes when the unit is off.

• During the heating operation, the fan speed will be very low and

the flap will be in the horizontal position (position ) until the air

being blown out of the unit begins to warm. Once the air warms

up, the flap position and fan speed change to the settings

specified with the remote control.

• Use the FLAP button on the remote control to adjust the

position of the flap. If you move the flap by hand, the flap

position according to the remote control and the actual flap

position may no longer match. If this should happen, shut

off the unit, wait for the flap to close, and then turn on the

unit again; the flap position will now be normal again.

• Do not have the flap pointed down during cooling

operation. Condensation may begin to form around the air

vent and drip down.

NOTE

CAUTION

HEAT

SWEEP

A. Sweep function

The flap starts moving

up and down to deliver

air over the sweep

range.

B. Setting the airflow manually

Referring to the above

illustration, use the

FLAP button to set the

airflow direction within

the range used during

the heating, cooling, or

dehumidifying

operation.

C. Auto flap function

The flap is set

to the

recommended

position.

COOL

DRY

FAN

NOTE

CAUTION

OI-002-13-EG

2column_01_SAP-KRV96EH_EN.fm Page 13 Wednesday, July 18, 2007 5:32 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo SAP-KRV96EH Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info