Bedienungsanleitung Sanyo Xacti VPC-S6 (Seite 155 von 159) (Englisch)

104644

155

Zoom out

Zoom in

Vorherige Seite

1/159

Nächste Seite

149 English

HINTS FOR TAKING PICTURES

Taking great pictures in difficult surroundings is easier than you might think.

By keeping a few points in mind and choosing the correct settings, you can

create photos that you’ll be proud to display and share.

If images are blurred even when the autofocus is used

Your camera employs an autofocus function. When you snap a picture using

the autofocus, the camera automatically adjusts the settings so that the

image will be in focus. If you are getting blurred images even when using the

autofocus, one or more of the following might be the reason.

k How the autofocus works

The autofocus is activated when the shutter button is lightly touched. Press

the shutter button slightly, and the target mark will appear on the LCD monitor

to indicate that the autofocus has been activated. Next, continue to gently

press the shutter button all the way to snap the picture. This two-step method

is the way to ensure that your photos are perfectly focused.

k Reasons for unfocused images

1 The shutter button was pressed before the image was focused.

2 After the image was focused, the subject moved.

Even if camera focuses the subject once, if the distance between the

camera and the subject is changed, the subject may become out of focus.

3 The focus setting is not set for the correct distance.

h If you shoot a close-up subject with the camera set to the normal focus

mode, or if you shoot a subject at normal distance with the camera set

to the macro (close-up) mode, the image will not be in focus.

k Preventing blurred images

1 Confirm that the camera is set to the correct focus mode for your subject.

2 Hold the camera correctly, and lightly touch the shutter button.

Wait for the target mark to appear in the LCD monitor, and holding the

camera steady, gently continue to press the shutter button all the way down.

Following these steps for a gentle but firm pressing of the shutter button will

ensure that you get beautifully focused photos.

k When the correct exposure setting is in doubt

When taking pictures with the light coming from behind the subject or through

a window, it is usually necessary to adjust the exposure setting before

shooting. Not only may it be difficult to determine the ideal exposure setting,

but in addition, having to correct the exposure for each and every shot can be

a bother. This is where the “auto bracket shots” function can prove to be a

great convenience.

When the auto bracket shots mode is selected, one press of the shutter

button captures a series of 7 successive images (or 5 images if the resolution

is set to y or x) as the exposure automatically changes. Later you can

view all the images in the bracket series to decide which one has the best

exposure, and select one image to save.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo Xacti VPC-S6 Seite 155

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sanyo Xacti VPC-S6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info