Bedienungsanleitung Satel CA-10 (Seite 33 von 60) (Englisch)

699577

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

SATEL CA-10 31

Notes:

• The options 3 and 4 are used when separate identifiers are assigned to particular event

groups, and the station to which messages are sent identifies the system by the first

identifier received. In such a case, the control panel can initiate a new connection for

each event group. Events from the control panel buffer are then sorted so that all events

of the same group (i.e. having the same identifier) can be sent during one connection.

• The options 5 and 6 are only meaningful when double-character codes are reported

(with 4/2 or 3/2 format). Single-character codes are then programmed (the second

character being 0, which is not sent), and the control panel, with the extension option on,

will add, respectively, the zone number or the user number as the second character.

Upon entering a double-character event code where both characters are different from 0,

it will be sent without the zone number / user number extension. Extensions of the event

codes by the zone number or the user number permit entering identical codes for events

of one type for all zones or partitions, with their subsequent differentiation based on the

added character.

Monitoring - programming identifiers

The functions FS48 to FS59 are used to program identifiers to be sent to the monitoring

stations. Depending on the needs, the control panel can send to the station quite detailed data

on the events occurring in the system, or just the basic ones. With two-character codes, it is

possible to send information on 225 events.

In order to circumvent restrictions caused by the transmission formats, some solutions have

been applied in the CA10 control panel, which consist in grouping the events (zone events,

partition 1 events, etc.) and assigning a separate identifier to each group.

In case of a small amount of information being sent (less than 225 different events), all the

identifiers for the particular station are to be programmed identically, and the event

sorting mode is to be disabled in monitoring options.

In the LED keypads, the programming is carried out in the way typical of hexadecimal (HEX)

functions. When programming the first two characters, the LED 12 is blinking, with the next two

- the LED 11. In the LCD keypads, the programming is performed by the method typical of

multi-digit hexadecimal (HEX) functions.

For the data formats 3/1 and 3/2, the last character should be 0 - the control panel will send

characters from 1 to F, 0 not being sent.

Note: If the monitoring station requires an identifier containing the digit zero, enter the

character “A” instead of zero (e.g. the identifier “1203” should be entered as “12A3”).

EXAMPLE: (for LED keypad)

programming the zone event identifier for the station 1 = A243

[4][8] [#] - call the function

[

0][2] [#] - enter the first two characters of identifier (LED 12 blinking)

[4][3] [#] - enter the next two characters of identifier (LED 11 blinking) and confirm them - exit the

function

FS48 - programming zone events identifier for station 1 (HEX)

FS49 - programming partition 1 events identifier for station 1 (HEX)

FS50 - programming partition 2 events identifier for station 1 (HEX)

FS51 - programming partition 3 events identifier for station 1 (HEX)

FS52 - programming partition 4 events identifier for station 1 (HEX)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-10 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info