699583
13
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
CA-5 SATEL
11
Problems with access to settings memory
– may occur when the RESET pins on the control
panel main board are shorted. If the pins are open, and connecting the power off and on does not
clear the trouble signaling, intervention of the service personnel is necessary.
Wrong communication codes
– means that during three consecutive communication sessions
with the computer the control panel hanged up after reading a wrong communication code three
times – in such a case, the panel suspends communication with the computer for 30 minutes (upon
answering a call it sends to the computer a message that the connection capability is disabled and
„hangs up”).
Monitoring trouble
– this message indicates multiple occupancy of the line, when the monitoring
station fails to go "off hook", does not send the handshake, or the acknowledgement signal after
receiving the codes. If this signaling persists, the monitoring is ineffective and requires intervention
of the service personnel or the technicians from monitoring station.
Dialing error
– information on the cause of an unsuccessful telephone connection (lack of the dialing
tone after the handset is lifted, or presence of an intermittent signal instead of the continuous one).
The signaling of trouble will remain on until next successful telephone connection.
Depending on the programmed options, the current trouble memory will be deleted on
clearing the cause of trouble, or only after running the above-mentioned current trouble
checkout function.
5.4 S
WITCHING THE CHIME
O
N
/O
FF
[8]
This function (holding down the [8] key) makes it possible to switch on/off the chime signal
(signaling the violation of selected zones when the control panel is disarmed) from the
keypad. Three short beeps in the keypad confirm switching off the chime signaling function,
whereas four short beeps and a long one mean that the signaling is on.
The installer specifies which zones will generate the chime signal.
5.5 F
IRE ALARM
[
*
]
This function makes it possible to trigger the fire alarm from the keypad. The control panel
activates signaling on the OUT1 output in the keypad and sends an appropriate code to the
monitoring station. The function can be disabled by the installer.
5.6 A
UXILIARY ALARM
[0]
The meaning of this alarm is specified depending on the needs. The function may transmit
information on the auxiliary alarm to the monitoring station (it may be, for example, a call for
medical assistance, as it was adopted in the Contact ID monitoring format).
The function may be disabled by the installer.
5.7 P
ANIC ALARM
[#]
This function makes it possible to trigger the panic alarm from the keypad. The control panel
activates signaling on the OUT1 output in the keypad and sends an appropriate code to the
monitoring station. The function can be disabled by the installer or limited to the keypad and
monitoring only (the SILENT panic alarm).
6. U
SER FUNCTIONS ACCESSIBLE WITH ACCESS CODE
If the control panel is not armed and is signaling no alarm, the users can access several
functions useful in everyday operation of the security system.
The user functions described in this section are activated by entering the user access code
and confirming it with the [
*
] key (not the [#] key as is the case when arming the system).
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Satel CA-5 Plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Satel CA-5 Plus

Satel CA-5 Plus Bedienungsanleitung - Deutsch - 24 seiten

Satel CA-5 Plus Zusatzinformation - Deutsch - 20 seiten

Satel CA-5 Plus Bedienungsanleitung - Deutsch - 24 seiten

Satel CA-5 Plus Installationsanweisung - Deutsch - 28 seiten

Satel CA-5 Plus Zusatzinformation - Englisch - 20 seiten

Satel CA-5 Plus Installationsanweisung - Englisch - 27 seiten

Satel CA-5 Plus Bedienungsanleitung - Holländisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info