Bedienungsanleitung Satel CA-5 Plus (Seite 12 von 20) (Englisch)

699583

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

10 Settings list CA-5

Note:

• The parameter has meaning for zone types 0, 1, 3, 9 and 10. For the

ENTRY

EXIT

zone, it is

the „entry delay time” (T

), and for the

COUNTING

zone – the „violations counting time”.

• Setting the delay time equal to zero for the I

NTERIOR DELAYED

reaction type results in this

zone delay time being assumed as equal to the highest value of the current entry delay

countdown.

FS 36, 37, 38, 39, 40 – OPTIONS OF ZONES 1, 2, 3, 4, 5 part 1

LED

No.

Name of option

in LCD keypad

Description of option

FS 36

FS 37

FS 38

FS 39

FS 40

1 auto reset 3* Auto reset 3

2 al. on exit end*

Alarm when zone is violated

after exit delay

3 bypass no exit Bypass when no exit

4 priority Controlled while arming

5 power up delay Power up delay 120 s.

– default

Note:

• The options designated with the * symbol change the meaning for the type 7 zone:

Option 1 – sets the manner of panel control by the zone:

− LED is off – bistable control: the control panel is armed when the zone is violated,

and disarmed when the zone status is normal. If it is armed and an alarm is

triggered, the end of zone violation will disarm the system and clear the alarm; if the

control panel is alarming but disarmed, violating the zone will not arm the system,

but the end of violation will clear the alarm,

− LED is on – monostable control: each violation of the zone will change the control

panel status to the opposite one: it will arm the system, when the control panel is

disarmed, and it will disarm the system and clear the alarm, when the control panel

is armed (and alarming). If the control panel is alarming but disarmed, violating the

zone will not arm the system, but it will clear the alarm. When in the monostable

mode, the installer can restrict functioning of the zone to arming only (option 2).

Option 2 – sets the monostable control range (important if the option 1 selected):

− LED is off – zone violation can arm/disarm the system and clear the alarm,

− LED is on – zone violation can only arm the system (disarming and clearing alarm is

only possible with the code from keypad).

• Option 3 – the zone will be bypassed if no zone with the

NTRY

XIT

function

(function 0

or 9) will be violated during the exit delay countdown.

• The zone with option 4 selected may not be violated or tampered at the moment of arming

– if it is, the arming will be refused by the alarm control panel, and names of the violated

zones will be displayed on the LCD keypad. This option does not apply to arming by

means of the function 7 zone (Arm/Disarm).

• The zone with option 5 selected is not monitored by the control panel for 120 seconds,

starting from the moment of the control panel power-up.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-5 Plus Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-5 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info