Bedienungsanleitung Satel INT-TSH-BSB (Seite 12 von 28) (Englisch)

699392

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

10 INT-TSH SATEL

Sign. entry delay [Entry time s.] – with this option enabled, the keypad will audibly signal the

entry delay countdown. The signaling refers to partitions selected when configuring the

SHOW ENTRY DELAY OF PARTITIONS parameter.

Sign. exit delay [Exit time sig.] – with this option enabled, the keypad will audibly signal the

exit delay countdown. The signaling refers to partitions selected when configuring the

SHOW EXIT DELAY OF PARTITIONS parameter.

Sign. alarms [Alarm signal.] – with this option enabled, the keypad will signal the alarms

audibly.

Key sounds – when this option is enabled, tapping the keypad screen is confirmed by a

beep.

Sign. trbl. in part. arm [Trbl. in p.arm.] – if this option is enabled, the trouble information on

status bar and on terminal will be hidden upon arming of all partitions operated from the

keypad (if the option is disabled, the trouble information will be hidden upon arming of one

of the partitions).

Sign. new trouble [New trbl. sign.] – with this option enabled, the keypad can audibly signal

the occurrence of a new trouble (additionally, the TROUBLE MEMORY UNTIL REVIEW option

must be enabled in the control panel – see: control panel programming manual). New

trouble signaling is cleared after the troubles have been reviewed by the user.

Show code entering [Show code ent.] – with this option enabled, entering the code is

presented on the keypad display by asterisks.

Exit delay clearing enable [Fin. exit time.] – with this option enabled, the exit delay time in

partitions with the EXIT DELAY CLEARING option enabled can be shortened by means of:

– macro command;

– terminal (after tapping in turn the

and keys).

Show viol. zones [Zone violation] – with this option enabled, violating the CHIME signal

triggering zone result additionally in the zone name being displayed.

Auto-Arm delay countdown [Auto-arm delay] – with this option enabled, the auto-arm delay

countdown in partition is signaled acoustically.

Show disarm messages [Show disarming] – if this option is enabled, the keypad will inform

about disarming with a displayed message at all times. If the option is disabled – only in

case of disarming from the given keypad.

Show arm messages [Show arm] – if this option is enabled, the keypad will inform about

arming with a displayed message (irrespective of how the system was armed).

Quick control [Control (8#)] – if this option is enabled, the O

UTS CONTROL user function can

be started without entering the user code:

– after tapping the icon on the main screen, if no macro command is assigned to

the group;

– after tapping and holding the

icon on the main screen for about 3 seconds, if at

least one macro command is assigned to the group;

– from the terminal, after you tap in turn the and keys.

Zones

For each of the keypad zones can be defined whether it will be used or not.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel INT-TSH-BSB Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel INT-TSH-BSB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info