Bedienungsanleitung Satel INT-TSH-BSB (Seite 21 von 28) (Englisch)

699392

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

SATEL INT-TSH 19

displayed, or they will be covered by the icon. The DLOADX program indicates using

appropriate graphic symbols the screen corners where the icons will be displayed.

The status screen is displayed automatically after the keypad is idle for 60 seconds. This rule

does not apply if the terminal is running. In such a case, the status screen may be displayed

later or even will not be displayed at all (e.g. when the service menu is open). The status bar

at the top of the screen indicates the system status by means of icons. Additionally, the

following information can be presented on the status screen:

– any text defined by the installer,

– partition status by means of symbols (select individual partitions whose status will be

displayed),

– zone status by means of symbols (select individual zones whose status will be

displayed),

– output status by means of symbols (select individual outputs whose status will be

displayed),

– temperature (indicate the control panel zone to which the temperature detector is

assigned, and define whether the temperature is to be displayed in Celsius or

Fahrenheit degrees),

– date and time (particular elements, such as day, month, year, hour, minutes and

seconds are to be configured individually),

– keypad name,

– zone status by means of messages (select individual zones whose status will be

displayed, and define the content and color of messages for normal state and for

violation, because only these two states are presented in the form of message),

– output status by means of messages (select individual outputs whose status will be

displayed, and define the content and color of messages for active and inactive output).

There are three font sizes available for use on the status screen. You can also define color of

the font to be used. Using the “drag and drop” method, you can easily select the place where

the given information will be presented on the display.

Change picture every – the parameter defines how quickly the pictures will change during

the slide show. The slide show can be displayed as the status screen background or the

screensaver. The photos to be displayed should be stored on a microSD memory. Their

size should not exceed 800 x 480 pixels. Only images in BMP format are supported. If the

programmed time is 0, the pictures will not change (the first picture stored on the microSD

card will be displayed all the time).

Show clock – if this option is enabled, the clock and status bar will be displayed after the

keypad is idle for 10 minutes.

Color – you can select the color of the clock.

Wallpaper – click to select another status screen wallpaper.

Save to SD card – click to save the new wallpaper on the microSD card.

7.1.6 End-of-line resistance

The resistance data are stored in the keypad. Before you start programming the

resistor values, click on the “Read” button in the “EOL resistance value” tab to read the

data from the keypad. Having programmed the resistor values, click on the “Write”

button in the “EOL resistance value” tab to write the data to the keypad. The EOL

resistors related data are not read / written when you click on the button in the

main menu of DLOADX program.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel INT-TSH-BSB Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel INT-TSH-BSB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info