Bedienungsanleitung Satel INT-TSI-SSW (Seite 9 von 24) (Englisch)

699390

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

SATEL INT-TSI 7

Static IP – if this option is enabled, you must program the keypad network settings (tap one

of the parameters below and, using the onscreen keyboard that will be displayed, enter the

data).

IP address – keypad IP address.

Mask – mask of the subnetwork in which the keypad is working.

Gateway – IP address of the network device through which the other devices in the

local network can communicate with devices in other networks.

DNS – IP address of the DNS server which is to be used by the keypad.

DHCP – if you enable this option, the keypad will automatically download the IP address,

subnet mask, gateway and DNS data from the DHCP server.

MAC – the unique hardware address of the keypad.

Details – this button is available if the “DHCP” option is enabled. Tap the button if you want

to check the keypad network settings.

Master – when this option is enabled, the keypad is working in the MASTER mode (it

communicates with the control panel directly through the keypad bus). The option is

enabled by default.

Enable – the button is available, if the “Master” option is enabled. Press to make

detection of the keypad possible by the keypad working in SLAVE mode. A window

will be displayed, showing the countdown of time remaining for detection of the

keypad. After the window is closed, detection of the keypad will be impossible again.

Slave – if this option is enabled, the keypad is working in SLAVE mode (it communicates with

the control panel via another keypad, which is working in the MASTER mode).

IP address of the master keypad – IP address of the keypad working in MASTER

mode by means of which communication with the control panel takes place. Tapping

a parameter will display a keyboard which can be used to edit the address.

Find – the button available when the “Slave” option is enabled. Press to find the keypad

working in MASTER mode by means of which communication with the control panel

is to take place (before that, press “Enable” on the keypad working in MASTER

mode).

The network settings may only be edited by the installer and administrators.

Only one keypad working in SLAVE mode can communicate with the control panel by

means of the keypad working in MASTER mode.

Information about keypad

The window displays the keypad name, its address in the alarm system, etc. In addition,

there is a function available that makes it possible to check if the keypad power supply is

appropriate.

Firmware

The window displays information on the keypad firmware.

Screen cleaning

The touch screen can be locked for 30 seconds so as to allow cleaning of the keypad. When

a dialog box appears, asking if you want to lock the screen, tap .

Remote access

The window shows the status of remote access function. Touch the keypad screen to enable

/ disable the function. When the function is enabled, you can save the configuration from the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel INT-TSI-SSW Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel INT-TSI-SSW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info