Bedienungsanleitung Satel INT-TSI-WSW (Seite 12 von 40) (Englisch)

699391

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

10 INT-TSI SATEL

9. Keypad configuration

9.1 Parameters and options

Parameters and options of the INT-TSI keypad can be programmed by means of:

• LCD keypad (terminal SERVICE MODE STRUCTURE HARDWARE LCD KEYPADS

SETTINGS [keypad name]);

• DLOADX program (“Structure” window “Hardware” tab “Keypads” item [keypad

name]). The keypad working in SLAVE mode is presented in the tree structure as a slave

in relation to the keypad working in MASTER mode (click on “+” next to the name of

keypad working in MASTER mode to see the branch with the name of keypad working in

SLAVE mode).

The procedure of entering the service mode by means of the INT-TSI keypad is described in

section “Programming keypad address by means of service function” (p. 7).

Some parameters and options are only available for the keypad working in MASTER mode.

Shown in square brackets are the names used in keypads.

9.1.1 Keypad

Name – individual name of the keypad (up to 16 characters).

In the case of the keypad working in SLAVE mode, the name can only be edited in the

TSI BUILDER program (see section “Changing the name of keypad working in SLAVE

mode” p. 36).

Partitions managed by keypad [Partitions] – the partitions which can be armed/disarmed or

alarm in which may be cleared from the keypad. These functions are available to the users

having a suitable authority level and access to those partitions.

Using the service code you can operate all partitions, irrespective of which partitions

are operated by the keypad.

Show alarms of partitions [Alarms] – the keypad can signal burglary alarms from selected

partitions.

Show fire alarms of partitions [Fire alarms] – the keypad can signal fire alarms from

selected partitions.

CHIME signal of zones [Chime zones] – the keypad can audibly signal violation of selected

zones. If the zone is armed, violation will not trigger the CHIME signal.

Zone disabling CHIME [Chime bps. zone] – zone, which, if violated, will disable the CHIME

feature for specified time.

Bypass time [Chime bps. time] – time during which the CHIME signal will be disabled after

violation of the zone which disables the signaling (time is counted from the zone restore). If

the value 0 is programmed, the signaling will not be disabled.

Quick Arm partitions [Quickarm part.] – partitions which will be armed in case of the quick

arming, i.e. without user authorization.

Show entry delay of partitions [Entry time p.] – information on entry delay countdown in

selected partitions can be displayed on the keypad.

Show exit delay of partitions [Exit time part.] – information on exit delay countdown in

selected partitions can be displayed on the keypad.

Alarm messages

Partitions [Part.alarm msg.] – if this option is enabled, messages on partition alarms will be

displayed (they contain the name of partition).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel INT-TSI-WSW Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel INT-TSI-WSW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info