Bedienungsanleitung Satel Integra 128 Plus (Seite 34 von 102) (Englisch)

699072

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

32 Programming SATEL

Description of the parameters

Control panel settings

Options related to working in conjunction with the Ethernet module are described in section

“Telephone options” (p. 68).

Ethernet module settings

For description of parameters and options, please refer to the Ethernet module manual.

DLOADX program settings

These settings apply not only to communication via Ethernet but also via GPRS,

provided that the INT-GSM module is connected to the ETHM-1 Plus module.

TCP/IP connection: DLOADX – ETHM/INT-GSM

The settings below apply to direct communication with the module.

Connection – select the set of parameters that will be used for establishing communication:

SERVER, PORT and DLOADX KEY.

LAN/WAN – you can enter the parameters yourself. These can be parameters needed for

the Wide Area Network (WAN) or Local Area Network (LAN) communication.

LAN: ETHM-1, Address n [n=module address] – settings of the ETHM-1 Plus / ETHM-1

module with the given address will be used (the module network address will not be

read if it is downloaded from the DHCP server). These settings can only be used for the

needs of LAN communication.

Server – address of the Ethernet module. If the Ethernet module is not in the same local

network as the computer with DLOADX program, it must be a public address. You can

enter either the IP address or the domain name.

Port – the number of TCP port used for communication between the control panel and

computer with DLOADX program using the ETHM-1 Plus (INT-GSM module connected to

the ETHM-1 Plus) / ETHM-1 module. You can enter a value from 1 to 65535. Default

value: 7090.

DLOADX key – a string of up to 12 alphanumeric characters (digits, letters and special

characters), used for data encryption during communication between the control panel and

the computer with DLOADX program using the ETHM-1 Plus / ETHM-1 / INT-GSM

module.

SATEL server

The settings below apply to communication with the module via the SATEL server.

Connection – select the set of parameters that will be used for establishing communication:

ETHM-1 ID, ETHM-1 MAC and DLOADX KEY.

MAC (ETHM-1) – you can enter the parameters yourself.

Module: ETHM-1, Address n [n=module address] – settings of the ETHM-1 Plus module

with the given address will be used.

ETHM-1 ID – individual identification number assigned to the ETHM-1 Plus module by the

SATEL server.

ETHM-1 MAC – hardware address of Ethernet module.

DLOADX key – a string of up to 12 alphanumeric characters (digits, letters and special

characters), used for data encryption during communication between the control panel and

the computer with DLOADX program using the ETHM-1 Plus / ETHM-1 / INT-GSM

module.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Plus Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info