Bedienungsanleitung Satel Integra 128 Plus (Seite 49 von 102) (Englisch)

699072

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

SATEL INTEGRA Plus 47

Time to re-arm – the parameter applies to the BANK VAULT partition type. After disarming, the

control panel will be analyzing for a defined period of time whether a door in the partition

will be opened by means of an access control module (partition keypad, code lock, etc.). If

the door is not opened, the partition will be automatically re-armed (the partition exit delay

countdown will not be running). If the time value is equal to 0, the partition will not be re-

armed. Irrespective of the preset value, if the DISARM DELAY parameter is 0, the partition

will not be re-armed.

Options

Arm by two codes [2 cds to arm] – if this option is enabled, arming requires that codes be

entered in turn by two users.

Disarm by two codes [2 cds to d-arm] – if this option is enabled, disarming requires that

codes be entered in turn by two users.

Codes on two keypads [Codes on 2 kpd] – if this option is enabled and the partition is

armed/disarmed using two codes, they must be entered from different keypads.

Valid within 30 sec [1st code 30s] – if this option is enabled and two codes are required for

arming/disarming, the second user has to enter the code within 30 seconds of entering the

code by the first user.

Timer priority – if this option is enabled, arming/disarming is always done by the timer. If this

option is disabled, the timer will disarm the partition if it was armed by the timer (if it was

armed by the user, the timer will not disarm the partition).

Infinite exit delay [Infin.ex.delay] – if this option is enabled, the partition will be armed after

entering the code and then:

– violating the 86. ENTRY/EXIT – FINAL, 87. EXIT – FINAL or 89. FINISHING EXIT DELAY type

zone,

– shortening of the exit delay time by the user (see EXIT DELAY CLEARING option).

If partition is not armed within 260 seconds, the “Arming failed” event will be registered to

the control panel memory. With the option enabled, the PARTITION EXIT DELAY will be taken

into account, if the partition is armed using a zone or timer.

Exit delay clearing [Fin.exit delay] – if this option is enabled, you can reduce the exit delay

countdown by entering 9 from the keypad/partition keypad. The partition will be armed

immediately. The exit delay clearing is only available from the same keypad/partition

keypad, from which the partition was armed (the EXIT DELAY CLEARING ENABLE option must

be enabled in the keypad).

Default block time – the option applies to the WITH TEMPORARY BLOCKING partition type. If the

option is enabled and the DEFAULT PART. BLOCK TIME is preset, the partition will be blocked

on arming for a default time period, as defined by the installer (the blocking time cannot be

programmed by the user).

Alarm – disarm allowed – the option applies to the WITH TEMPORARY BLOCK partition type.

During alarm, the partition can be disarmed by the users who do not have the ACCESS TO

TEMPORARY BLOCKED PARTITIONS

right.

Audible alarm after verification [Bell on 2nd] – if this option is enabled, the alarms from

zones with the PRE-ALARM or WITH VERIFICATION option enabled will only trigger loud alarm

signaling after verification. The unverified alarms will not trigger loud alarm signaling.

Partition timer

Partitions can be controlled with an additional timer, which can be programmed:

• in the keypad, using the function available in the user menu ([code] OPTIONS

PROGRAMMING

PARTITION TIMERS),

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Plus Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info