Bedienungsanleitung Satel Integra 128 Plus (Seite 67 von 102) (Englisch)

699072

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

SATEL INTEGRA Plus 65

Timer activates/deactivates – the option applies to the 24. MONO SWITCH and 25. BI SWITCH

outputs. If enabled, the output can be controlled by selected timers. Turning the timer ON

activates the output (in case of the 24. MONO SWITCH type output – for a programmed

time), and turning the timer OFF deactivates the output.

ON/OFF – the option refers to the 24. MONO SWITCH type outputs. If it is enabled, violation of

the control zone when the output is on will turn the output off. If the option is disabled,

each violation of the control zone will turn the output on for a preset time.

Not controlled by arming – the option refers to the 105. SHUTTER UP and 106. SHUTTER

DOWN

type outputs. If enabled, the partition arming / disarming has no effect on the output

status.

5.4 Output triggering

Zones – indicate the zones. The output will be controlled by events related to these zones.

LCD keypads – indicate the LCD keypads. The output will be controlled by events related to

these LCD keypads.

Partitions – indicate the partitions/partition keypads. The output will be controlled by events

related to these partitions/partition keypads.

Timers – indicate the timers which will control the output.

Master users / users – indicate the masters/users. The output will be controlled by events

related to these masters/users.

Outputs – indicate the output. The output will be controlled by events related to these

outputs.

Expanders – indicate the expanders. The output will be controlled by events related to these

expanders.

Troubles – indicate the troubles. The output will be activated by occurrence of these

troubles.

Voice mess. – indicate the synthesizers. The output will be active when the voice messages

with indicated numbers are played back.

Remote switches – indicate the remote switches. The users will control the output by

controlling the selected switches via the telephone.

Burglary zones in partition – indicate the partition in which the output will be activated by

starting the test of burglary zones.

Fire/technical zones in partition – indicate the partition in which the output will be activated

by starting the test of fire or technical zones.

Arm mode – indicate the arm mode whose activation will activate the output.

Telephone usage type – indicate which cases of using the telephone communication by the

alarm control panel will activate the output.

5.5 Clearing alarm in partitions

Indicate the partitions in which alarm clearing will be available (the users having access to

these partitions will be able to clear the alarm).

The alarm must be signaled in the partition where it is to be cleared. If no alarm is

being signaled by the given partition, it will be impossible to clear it.

5.6 Output disabling

Disabling timers – for the 105. SHUTTER UP and 106. SHUTTER DOWN type outputs, you can

indicate the timers which will block the output. When the timer is active, disarming

(105. SHUTTER UP) / arming (106. SHUTTER DOWN) will not activate the output.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Plus Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info