699062
7
Zoom out
Zoom in
Vorherige Seite
1/114
Nächste Seite
SATEL INTEGRA 5
1. General
This manual applies to the control panels of the INTEGRA series:
INTEGRA 24
INTEGRA 32
INTEGRA 64
INTEGRA 128
INTEGRA 128-WRL
The control panel may be programmed:
locally
LCD keypad,
computer with the DLOADX program installed, connected to the control panel RS-232
port,
remotely
computer with the DLOADX program installed, communicating via the telephone
network (e.g. through modem or GPRS) or via the Ethernet network. Modem
communication can take place via the built-in control panel modem or an external
modem connected to the control panel. GPRS communication is possible in case of
INTEGRA 128-WRL control panel. For GPRS communication to be possible in case of
other control panel, the INT-GSM module must be installed in the alarm system or the
SATEL GSM module must be connected to the control panel. Communication over
Ethernet is possible after connecting the ETHM-1 Plus / ETHM-1 Ethernet module to the
control panel.
virtual keypad available in the internet browser, mobile phone or smartphone.
Programming the control panel is possible when:
the PERMANENT SERVICE ACCESS option is enabled (the option is enabled by default the
control panel can be programmed by any method),
the PERMANENT DLOADX ACCESS option is enabled (the option is enabled by default
the control panel can only be programmed by means of the DLOADX program),
the installer has been granted a temporary access to the control panel using the
SERVICE ACCESS function (the control panel can be programmed by any method).
The standards require that the administrators (masters) limit the installer access after
installation is finished.
2. Configuring the control panel with keypad
Programming the control panel with keypad (real or virtual) should be carried out using the
service functions, available in the service mode menu. Some features may not be available in
the virtual keypads.
2.1 Starting the service mode
1. Enter the service code (by default 12345) and press the key.
2. Using the or key, select the item SERVICE MODE from the list and press the or
key.
You can also start the service mode using the key shortcut:
[service code] 9
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Satel integra 128-WRL wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Satel integra 128-WRL

Satel integra 128-WRL Installationsanweisung - Deutsch - 2 seiten

Satel integra 128-WRL Zusatzinformation - Deutsch - 121 seiten

Satel integra 128-WRL Bedienungsanleitung - Deutsch - 38 seiten

Satel integra 128-WRL Bedienungsanleitung - Englisch - 51 seiten

Satel integra 128-WRL Installationsanweisung - Englisch - 37 seiten

Satel integra 128-WRL Zusatzinformation - Holländisch - 121 seiten

Satel integra 128-WRL Bedienungsanleitung - Holländisch - 52 seiten

Satel integra 128-WRL Kurzanleitung - Holländisch - 24 seiten

Satel integra 128-WRL Installationsanweisung - Holländisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info