Bedienungsanleitung Satel Integra 128 (Seite 44 von 114) (Englisch)

699073

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

42 Programming SATEL

system owner does not want the remote programming to be carried out without its

knowledge. The computer with DLOADX program must have a public IP address.

2. Initiating connection by SMS message. The computer with DLOADX program must have

a public IP address.

Required settings of the control panel for all methods of establishing connection:

• programmed number of TCP port used for communication,

• configured GPRS settings.

Initiating connection from the keypad

Required settings of the control panel:

• programmed address of computer with DLOAX program.

1. Click on the button in the DLOADX program.

2. A drop-down menu will be displayed. Select “TCP/IP: DLOADX <- GSM/GPRS” in it.

3. A window will open. Enter the number of the TCP port which is to be used for

communication (identical to that programmed in the GSM module, unless communication

takes place via a network device redirecting to another port).

4. Having entered the number of TCP port, click the “Start” button. Activation of the server

for GPRS connection will follow.

5. In the LCD keypad connected to the control panel, start the START DWNL-GPRS function

([code] DOWNLOADING START DWNL-GPRS). The function is available to the

installer, administrator and the user having the DOWNLOADING STARTING right.

6. The DLOADX program will inform you about establishing connection by means of

a suitable message.

Initiating connection by SMS message

Required settings of the control panel:

• programmed control command, which, if sent in the SMS message, will initiate connection

with the DLOADX program.

1. Click on the button in the DLOADX program.

2. A drop-down menu will be displayed. Select “TCP/IP: DLOADX <- GSM/GPRS” in it.

3. A window will open. Enter the number of the TCP port which is to be used for

communication (identical to that programmed in the GSM module, unless communication

takes place via a network device redirecting to another port).

4. Having entered the number of TCP port, click the “Start” button. Activation of the server

for GPRS connection will follow.

5. Send to the control panel the following SMS message:

xxxx= (“xxxx” – the control command to initiate establishment of communication with

DLOADX program) – the control panel is to connect to the computer address

programmed in the control panel,

xxxx=aaaa:p= (“xxxx” – the control command to initiate establishment of communication

with DLOADX program; “aaaa” – address of the computer with DLOADX program (IP

address or domain name); “p” – TCP port) – the control panel is to connect to the

computer whose address has been given in the SMS message and use for

communication the TCP port given in the SMS message.

6. The DLOADX program will inform you about establishing connection by means of

a suitable message.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info