Bedienungsanleitung Satel Integra 128 (Seite 47 von 114) (Englisch)

699073

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

SATEL INTEGRA 45

Required settings of the control panel:

• EXTERNAL MODEM, MODEM ISDN/GSM/ETHM and ANSWERING – ETHM/GSM options

enabled.

Required settings of the GSM module:

• programmed: address of the computer with DLOADX program, number of TCP port used

for communication, data encryption key and control command which, if sent in the SMS

message, will initiate connection with the DLOADX program,

• configured GPRS settings.

Additionally, you can enable in the module the option that will enable connection to be

established with the computer whose network address will be given in the SMS message

initiating the connection.

Initiating a connection

1. Click on the button in the DLOADX program.

2. A drop-down menu will be displayed. Select “TCP/IP: DLOADX <- GSM/GPRS”.

3. A window will open. Enter the following information in the corresponding fields:

– number of the TCP port which is to be used for communication (identical to that

programmed in the GSM module, unless communication takes place via a network

device redirecting to another port),

– data encryption key (identical to that programmed in the GSM module).

4. Having entered the number of TCP port and data encryption key, press the “Start” button.

Activation of the server for GPRS connection will follow.

5. Send to the GSM module the following SMS message:

zzzzzz. or zzzzzz= (“zzzzzz” – the control command programmed in the GSM module

initializing GPRS communication with the DLOADX program) – the GSM module will

connect the control panel to the computer whose address is programmed in the

module,

zzzzzz=aaaa:p. or zzzzzz=aaaa:p= (“zzzzzz” – the control command programmed in the

GSM module initializing GPRS communication with the DLOADX program; “aaaa” –

address of the computer with DLOADX program (IP address or domain name); „p” –

TCP port) – the GSM module will connect the control panel to the computer whose

address is given in the SMS message (the computer address programmed in the GSM

module will be ignored).

6. The DLOADX program will inform you about establishing connection by means of

a suitable message.

3.5 Control panel data file

After readout of the control panel data, you can save the data file to the computer disk. The

data file is encrypted. Default encryption prevents the data file from being opened in other

location than the disk where the DLOADX program, which was used to save the data, is

installed. You can change the default key for data encryption (“File” “Access setup” “Data

files encryption key”). If you use an encryption key other than the default one, you can open

the control panel data file in any location, after entering the encryption key.

You can export the control panel data file (“File” “Export/Import” “Export file”). Once the

file is exported, it can then be imported from any computer (“File” “Export/Import” “Import

file”). When exporting the file, you can enter the encryption key which will be required during

import of the file.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info