Bedienungsanleitung Satel Integra 128 (Seite 64 von 114) (Englisch)

699073

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

62 Programming SATEL

2. FIRE/BURGLARY – signals the burglary and panic alarms (continuous sound) and the fire

alarms (intermittent sound).

3. FIRE ALARM – signals the fire alarms (from fire zones and triggered from keypads).

4. KEYPAD ALARM – signals the alarms triggered from keypad: fire, medical (auxiliary) and

panic (except: silent panic alarm).

5. FIRE (FROM KEYPAD) – signals the fire alarms triggered from keypad.

6. PANIC (FROM KEYPAD) – signals the loud panic alarms triggered from keypad.

7. MEDICAL ALARM (FROM KEYPAD) – signals the medical assistance call alarm triggered from

keypad.

8. TAMPER ALARM – signals the tamper alarms.

9. DAY ALARM – signals the following:

– alarms from 13. PANIC-SILENT type zones,

– medical alarms from the 14. MEDICAL - BUTTON and 15. PERSONAL EMERGENCY type

zones,

– alarms from 7. DAY/NIGHT type zones, if the partition to which the zone belongs is

disarmed,

– alarms from 8. EXTERIOR type zones, if the armed mode which assumes that the user

will stay inside the protected facility is enabled in the partition (see: USER MANUAL),

– alarms from 4. PERIMETER type zones, if the SIGNALING DELAY has been programmed for

them,

– alarm from 5. INSTANT and 6. EXIT type zones, if the BELL DELAY option has been

enabled and the SIGNALING DELAY has been programmed for them,

– alarms from zones, for which the REPORTING DELAY option has been enabled, provided

they were violated during the ENTRY DELAY countdown,

– unverified alarms, if the AUDIBLE ALARM AFTER VERIFICATION option is enabled for the

partition,

– the first violation of the 8. EXTERIOR type zones when they are armed, provided the

SURVEILLANCE TIME has been programmed for the zone,

– violation of the counting zones (16-31 type zones) when armed.

10. DURESS ALARM – action carried out under duress – signals that a DURESS type code

(or prefix) has been used in the system.

11. CHIME – signals violation of the zones when they are disarmed.

12. SILENT ALARM – activates in the same situations as the 9. DAY ALARM output. Additionally,

it can signal silent panic alarms.

13. TECHNICAL ALARM – signals alarms from zone types 40-56.

14. ZONE VIOLATION – indicates the violations of zones.

15. VIDEO ON DISARMED – controlled by zones with the VIDEO ON DISARMED option enabled.

16. VIDEO ON ARMED – controlled by zones with the VIDEO ON ARMED option enabled.

17. READY STATUS – indicates whether the system is ready for arming, i.e. whether there are

no violated zones (active when there is no violation).

18. BYPASS STATUS – indicates the bypassing of zones.

19. EXIT DELAY STATUS – indicates the EXIT DELAY countdown.

20. ENTRY DELAY STATUS – indicates the ENTRY DELAY countdown.

21. ARMED STATUS – indicates the armed status of partitions.

22. FULL ARMED STATUS – active if all selected partitions are armed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info