Bedienungsanleitung Satel Integra 128 (Seite 77 von 114) (Englisch)

699073

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

SATEL INTEGRA 75

6.5 Times

Global entry delay – parameter taken into account in the delayed zones, for which the

programmed ENTRY DELAY is equal to 0.

Global alarm time – time of signaling alarm in keypads, proximity card arm/disarm devices,

proximity card readers and DALLAS chip readers.

No armed indication after – time counted from the moment of partition arming, during which

information about armed status is displayed on the keypads. Programming the value 0

means that keypads will indicate the armed status as long as the partition is armed.

AC loss report delay – time during which the control panel must not receive AC power so

that information of it can be saved to the event log. Having programmed the value 0

means that the information of AC power loss will not be saved to the event log.

Tel. line loss report delay – time during which abnormal voltage must be on the telephone

line for the control panel to report the telephone line trouble. A delay in reporting the

trouble prevents sending information about short-time voltage dips (e.g. during a phone

call) or decays.

Default part. block time – the time period during which the WITH TEMPORARY BLOCK type

partitions with enabled DEFAULT BLOCK TIME option will be blocked.

Summer/winter time [Daylight saving] – the control panel can automatically adjust the clock

settings due to a change from the summer time to the winter time according to the

selected schedule.

Summer time from – if the control panel clock is to be corrected by 1 or 2 hours according to

dates, you should enter the dates (day, month) after the clock is changed to the summer

time (moved forward).

Winter time from – if the control panel clock is to be corrected by 1 or 2 hours according to

dates, you should enter the dates (day, month) after the clock is changed to the winter

time (moved back).

RTC clock correction [Clock adjustm.] – if the accuracy of control panel clock is inadequate,

the clock settings may be adjusted once per 24 hours (at midnight) by a defined time. The

correction time is programmed in seconds. The maximum correction can be ±19 seconds

per 24 hours.

Time server – if the control panel is to synchronize the time with the server (automatically

and after suitable function is enabled by the installer or master user), enter the address of

time server supporting the NTP protocol. Time synchronization is possible for the

INTEGRA 128-WRL control panel and any other panel to which the ETHM-1 / ETHM-1

Plus / INT-GSM module is connected.

Time zone – if the control panel is to synchronize the time with the server, indicate the time

zone, i.e. the difference between the universal time (GMT) and the zone time.

Do not report time server connection trouble [No t.serv.trbl] – with this option enabled, no

trouble will be reported if there is no communication with the time server.

6.6 Service options and parameters

In the keypad, most of the options and parameters, as described below, are available in SM

SETTINGS

submenu.

Service access code – a code that allows access to the service mode, as well as some

functions in the user menu.

Disable service mode [Block SM] – with this option enabled, entering the service mode

“from pins” (by hardware means) will be impossible (entering the service mode “from pins”

will only be possible if the control panel factory settings are restored).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info