Bedienungsanleitung Satel Integra 128 (Seite 102 von 114) (Englisch)

699073

102

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

100 Programming SATEL

– events assignment (if STATION 1 AND 2 is selected),

– advanced options (if Ademco Express, Contact ID, SIA or TELIM format is selected).

5. If a reporting format other than CONTACT ID (FULL) or SIA (FULL) is selected:

– assign identifiers to the partitions, zones, keypads and expansion modules,

– program the codes for events which are to be reported.

6. Define the parameters of test transmissions.

12.2.2 Reporting via Ethernet network

The ETHM-1 / ETHM-1 Plus module must be connected to the control panel.

Events in TELIM format cannot be sent through Ethernet network.

1. Enable the REPORTING - ETHM-1 / REPORTING – ETHM/INT-GSM option.

2. Determine whether the event codes will be sent to both monitoring stations or to one of

them only (STATION 1 OR 2 / STATION 1 / STATION 2 / STATION 1 AND 2). If the INT-GSM

module is connected to the ETHM-1 Plus module, you can select the DUAL PATH REPORTING

option.

3. Program the following for the monitoring station to which event codes are to be sent:

– reporting format in which the codes will be sent,

– server address,

– port number,

– IP format in which the codes will be sent (SATEL or SIA-IP),

– encryption key (STATION KEY) and control panel identifier for the purposes of reporting

via Ethernet (ETHM KEY) if the SATEL format is selected,

– additional parameters if the SIA-IP format is selected,

– identifiers with which the events will be sent,

– event assignment (if STATION 1 AND 2 is selected),

– advanced options if SIA reporting format is selected.

4. If a reporting format other than CONTACT ID (FULL) or SIA (FULL) is selected:

– assign identifiers to the partitions, zones, keypads and expansion modules,

– program the codes for events which are to be reported.

5. Define the parameters of test transmissions.

6. If the INT-GSM module is connected to the ETHM-1 Plus module, define the priority of

Ethernet reporting in the ETHM-1 Plus module settings.

12.2.3 GPRS reporting

The TELIM format events cannot be sent using the GPRS technology.

The GPRS settings (APN, username, password, DNS server) must be programmed in

the INTEGRA 128-WRL control panel / INT-GSM module / GSM module.

Reporting by using the INT-GSM module

1. Enable the REPORTING – ETHM/INT-GSM option.

2. Determine whether the event codes will be sent to both monitoring stations or to one of

them only (STATION 1 OR 2 / STATION 1 / STATION 2 / STATION 1 AND 2). If the INT-GSM

module is connected to the ETHM-1 Plus module, you can select the DUAL PATH REPORTING

option.

3. Program the following for the monitoring station to which event codes are to be sent:

– reporting format in which the codes will be sent,

– server address,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info