Bedienungsanleitung Satel Integra 128 (Seite 20 von 51) (Englisch)

699073

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

18 User Manual SATEL

Arming mode – allows to select the arming mode which is to be used (the shortcut key is

shown in square brackets):

[0] full arming (to be used after everybody has left the protected area),

[1] full arming + bypasses (allows the users to stay in the protected area) – the zones for

which the BYPASSED IF NO EXIT option is enabled by the installer will be bypassed,

[2] arming without interior (allows the users to stay in the protected area):

− interior zones (3. INTERIOR DELAYED zone type) will be disarmed,

− violating the exterior zone (8. EXTERIOR zone type) will trigger a silent alarm,

− violating another alarm zone will trigger a loud alarm.

[3] arming without interior and without entry delay (allows the users to stay in the

protected area – to be used when nobody else is to enter the protected area) – this

arming mode is similar to the previous one, but the delayed zones operate as the

instant ones (no entry delay).

Cancel 1st code – if the partition is armed/disarmed by means of two codes and the first

code has already been entered, the user can still cancel the consent to arming/disarming.

Change own code – allows the user to change his/her own code.

Change telephone code – allows the user to change his/her own telephone code.

Change prefix – available to the administrator, if the use of prefixes in the system has been

made available by the installer (the prefix length has been defined). It enables to program

the prefixes and the time to remind about the need to change the prefix. Each code will

have to be preceded by a prefix:

normal – for everyday use. By default, it consists of a suitable number of digits 0 (e.g. if

the determined prefix length is 4, the default prefix is 0000),

DURESS – for use, when the user has been forced to enter the code. Using the code will

trigger a silent alarm. By default, it consists of a suitable number of digits 4 (e.g. if the

determined prefix length is 3, the default prefix is 444).

Users – the following functions are available in the submenu:

New user – allows to create a new user (see: “Adding new user” p. 28).

Edit user – allows to edit the existing users (see: “Edit user” p. 29).

Remove user – allows to remove the existing users (see: “Removing a user” p. 29).

The administrator defines whether the installer is to have access to the USERS

submenu (SERV. CAN EDIT option in the CHANGE OPTIONS submenu).

Masters – the submenu provides the following functions available to the installer:

New master – allows to create a new administrator.

Edit master – allows to edit the existing administrators.

Remove master – allows to remove the existing administrators.

Zone bypasses – the following functions are available in the submenu:

Inhibit – allows to temporarily bypass the zones (see: “Zone inhibiting” p. 31).

Isolate – allows to permanently bypass the zones (see: “Zone isolating” p. 32).

Set time – allows to program the control panel clock. The data are entered in the following

format:

time – hour:minute:second,

date – day:month:year.

System state – allows to view the troubles and, if the GRADE 2 global option has been

enabled by the installer, also the alarms and bypassed zones, as well as to check the

partition status.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info