Bedienungsanleitung Satel Integra 128 (Seite 23 von 51) (Englisch)

699073

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

SATEL INTEGRA 21

Supply voltages – available to the installer. Enables checking of the supply voltage for

individual expansion modules.

Temperatures – allows the user to check the temperature. The temperature information is

provided by wireless temperature detectors or ABAX 2 wireless devices equipped with a

temperature sensor.

Radio devices – allows to check the radio signal level for ABAX 2 / ABAX system wireless

devices supported by the control panel.

Zone Test – the submenu contains functions which allow to test the detectors connected

to the zones (see: “Zone testing” p. 35).

Battery test – available to the installer. Upon starting the function, the control panel will

generate events to inform about the status of batteries of the control panel and

hardwired expansion modules with power supply. Additionally, the status of 60. TECH.-

BATTERY LOW type zones will be analyzed.

Manual transmission test – generates an event, which starts the procedure of event

transmission to the monitoring station (a code sent with the system identifier).

Monitoring station test (1A, 1B, 2A, 2B) – allows to send a test transmission to the

monitoring station (separate functions for each of the telephone numbers). When

sending the transmission, messages are displayed to inform about the currently

performed operation. The function is useful when starting the reporting or in case of any

reporting trouble.

GPRS monit.test – sends a test transmission to the monitoring station via GPRS. When

sending the transmission, messages on the display provide information on the currently

performed operation. only INTEGRA 128-WRL

Messaging test – allows to test the messaging function. Upon starting the function:

1. Enter the number of the telephone (consecutive number on the telephone list).

2. Press the  key.

3. Enter the number of voice message.

4. Press the

key. The control panel will call the indicated number and play back the

message.

Answering test – if this function is started, information on the number of rings and going

off-hook is displayed when answering the telephone call.

Proximity card test – allows to check the number of proximity card and establish to whom

it belongs (if the card belongs to a user of the system).

CA-64 PTSA test – allows to test the mimic board.

View masters – available to the administrator. It makes it possible to check in which

objects the master users are created.

Keypad name – allows to check the given keypad name.

File in DLOADX – displays the date and time of writing the data to the control panel by

means of the DLOADX program and the name of file with control panel data.

Panel version – displays information on the control panel firmware version.

STM program version – displays information on the program version of the processor

used to operate ABAX system and control panel zones. only INTEGRA 128-WRL

GSM IMEI/v/sig. – allows to check the level of signal received by the GSM telephone

antenna, individual identification number of the telephone, and the telephone version.

The  and  keys are to be used for scrolling through the displayed information. only

INTEGRA 128-WRL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info