Bedienungsanleitung Satel Integra 24 (Seite 60 von 114) (Englisch)

699079

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

58 Programming SATEL

delay countdown will result in registering an “Alarm” event (this event is reported and

initiates messaging).

Report if not armed – option for the 7. DAY/NIGHT zone type. If it is enabled, the alarm will

be reported at all times. If it is disabled, the alarm will only be reported if the zone is

armed. If the zone is disarmed, the zone violation will trigger a warning alarm. The warning

alarm does not cause any loud alarm signal and is not reported. It can be signaled by the

9. DAY ALARM, 12. SILENT ALARM and 116. INTERNAL SIREN type outputs.

Event: arming failed [Event arm fail] – option for 80. ARMING and 82. ARM/DISARM zone

types. If this option is enabled, unsuccessful arming by means of zone is saved to the

event log.

Partition temporary blocking – option for the 84. GUARD zone type. If it is enabled, violation

of the zone will block the partition for the time of guard round.

Restore after bell – with this option enabled, the zone restore code will be reported to the

central monitoring station only after the alarm signaling is ended.

Restore after disarm – with this option enabled, the zone restore code will be reported to

the central monitoring station only after disarming the partition to which the zone belongs.

Alarm on exit delay end – with this option enabled, the zone will trigger alarm if it is violated

at the moment of ending the exit delay countdown. If the option is disabled, the alarm will

only be triggered in case of changing the zone status from normal to violated when armed.

Store to event log – option for the 47. NO ALARM ACTION and 63. TROUBLE zone types. If it is

enabled, violation of the zone will result in storing an event according to the zone type (in

case of the 47. NO ALARM ACTION zone type, the information to be written depends

additionally on the NO REPORTING option).

No reporting – option for the 47. NO ALARM ACTION zone type with the STORE TO EVENT LOG

option enabled:

– enabled – violation of the zone will write an event informing about zone violation,

– disabled – violation of the zone will result in writing an event informing about keybox

opening, the code of which is sent to the monitoring station.

No restore event – option for the 47. NO ALARM ACTION zone type with STORE TO EVENT LOG

and NO REPORTING options enabled. If it is enabled, the zone restore is not stored into the

event log.

Store event only if armed – option for the 47. NO ALARM ACTION zone type. It is available, if

the STORE TO EVENT LOG option is enabled. If it is enabled, violations of the zone will be

written into the event log, provided that the partition to which the zone is assigned, is

armed.

No bypass if armed – option for the 64-79 zone types. If it is enabled, violation of the armed

zone will block no group of zones (provided that during the exit delay countdown an exit

from the partition is recorded).

Messaging cancelling – option for the 81-83 zone types. If it is enabled, violation of the

zone will cancel the messaging, if it is currently ongoing.

Alarm on unbypass – if the option is enabled and the armed zone is violated after being

bypassed, an alarm will be triggered.

Tamper alarm always loud – if this option is enabled, tamper alarm is always loud (if option

is disabled – tamper alarm is loud only when armed).

Reporting delay – option for the 4-8 and 64-79 zone types. Violation of the zone during the

entry delay countdown will trigger a warning alarm. The warning alarm does not cause any

loud alarm signal and is not reported. It can be signaled by the outputs of 9. DAY ALARM,

12. SILENT ALARM and 116. INTERNAL SIREN type. If the zone is not disarmed within 30

seconds, the entry delay has expired or another instant is violated, the burglary alarm will

be triggered.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 24 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 24

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info