Bedienungsanleitung Satel Integra 256 Plus (Seite 40 von 102) (Englisch)

699031

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

38 Programming SATEL

2. A drop-down menu will be displayed. Select the “Modem - INTEGRA with ext. modem” in

it. A window will open in which modem initialization information will be displayed.

3. In the LCD keypad connected to the control panel, start the START DWNL-MOD function

([code] DOWNLOADING START DWNL-MOD). The function is available to the installer,

administrator and user having the DOWNLOADING STARTING right.

4. The control panel will call the programmed computer telephone number.

5. The DLOADX program will answer the connection automatically or the program user must

accept establishing the communication (which depends on the settings programmed in

the “Configuration” window, “Modem” tab). A suitable message will inform about the

connection being established.

3.4.2 Starting remote programming via Ethernet network

Programming through the Ethernet network is possible, if the ETHM-1 / ETHM-1 Plus module

is connected to the control panel (the RS-232 ports of control panel and module must be

connected).

Before you start the remote programming via Ethernet, make sure that the local

programming is finished.

The connection can be established in one of the following methods:

1. Initiating connection from the DLOADX program. The control panel can be programmed

from any location. If communication takes place in a wide area network, the control panel

must have a public IP address.

2. Initiating connection from the keypad (by the control panel). The control panel can be

programmed only from specified location. This method is recommended when the alarm

system owner does not want the remote programming to be carried out without its

knowledge. If communication takes place in a wide area network, the computer with

DLOADX program must have a public IP address.

3. Initiating connection by SMS message. The computer with DLOADX program must have

a public IP address. The INT-GSM module must be connected to the ETHM-1 Plus

module.

4. Establishing connection via the SATEL server. The control panel can be programmed

from any location. No public IP address is required for the control panel or the computer

with DLOADX program..

Required settings of the control panel for all methods of establishing connection:

• EXTERNAL MODEM, MODEM ISDN/GSM/ETHM and ANSWERING – ETHM/GSM options

enabled.

Required settings of the ETHM-1 Plus / ETHM-1 module for all methods of establishing

connection:

• COMMUNICATION WITH DLOADX option enabled,

• data encryption key (DLOADX KEY) programmed,

• network settings configured.

Initiating connection from the DLOADX program

Required settings of the ETHM-1 Plus / ETHM-1 module:

• programmed number of TCP port used for communication.

Required settings of the DLOADX program for direct communication with the module:

• programmed: Ethernet module address (SERVER), number of TCP port used for

communication and data encryption key (DLOADX KEY) or selected set of parameters

“LAN: ETHM-1, Address n” (settings of the ETHM-1 Plus / ETHM-1 module with address

“n” will be used).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 256 Plus Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 256 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info