Bedienungsanleitung Satel Integra 256 Plus (Seite 57 von 102) (Englisch)

699031

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

SATEL INTEGRA Plus 55

partition). If the option is disabled, zone violation will arm, and the zone restore will disarm

the partition.

CHIME in module – with this option enabled, zone violation can be signaled in partition

keypads, code locks and readers expanders assigned to the same partition as the zone

(the option CHIME must be enabled in the expander).

No alarm sign. in keypad – option for 13. PANIC-SILENT zone type. If it is enabled, alarm from

this zone will not be signaled on keypads. Clearing this alarm by means of keypad will not

be possible.

Outputs signaling the silent panic alarm can be deactivated using the CLEAR LATCHED

OUTPUTS user function.

Video on disarmed – if this option is enabled, violating the zone when the partition is

disarmed will activate the 15. VIDEO ON DISARMED type output.

Video on armed – if this option is enabled, violating the zone when the partition is armed will

activate the 16. VIDEO ON ARMED type output.

Bypass disabled – if this option is enabled, the user cannot bypass the zone.

Bypassed if no exit – if this option is enabled, the zone will be automatically bypassed,

when no partition exit is registered during the partition exit delay countdown. The zone will

also be bypassed when the “full + bypasses” arming mode is on (registering a partition exit

is irrelevant then). The zone will be unbypassed after the partition is disarmed.

Alarm in arm state – an option for the zone types 64-79. It is available, if the NO BYPASS IF

ARMED

option is enabled. When it is enabled, violating an armed zone will cause an alarm

(if the partition exit was registered upon arming).

Alarming – option available for the 91. DETECTOR MASK zone type. If enabled, violation of the

zone will additionally trigger an alarm.

Auto-reset 3 – with this option enabled, the zone can trigger up to 3 alarms. As long as the

alarm is not cleared or the partition is not armed/disarmed, violations of the zone will not

trigger any alarm.

Auto-reset 1 – with this option enabled, the zone can trigger only 1 alarm. As long as the

alarm is not cleared or the partition is not armed/disarmed, violations of the zone will not

trigger any alarm.

Clearing Autoreset – with this option enabled, alarm counters for the zones for which the

AUTO-RESET 3 or AUTO-RESET 1 option is enabled can be automatically reset at midnight

(violations of these zones will be able to trigger alarms again).

Pre-alarm – if this option is enabled, alarms from the zone will be verified.

With verification – an option for the zone types 0-2, 85-86 and 94-95. If it is enabled, alarms

from the zone will be verified.

Alarm from the zone with enabled PRE-ALARM or WITH VERIFICATION option will be an

unverified alarm, unless during verification (see description of the ALARM VERIFICATION

TIME parameter p. 46) an alarm will be caused by another zone with enabled PRE-

ALARM or WITH VERIFICATION option. In such a case, a verified alarm will be triggered.

Bell delay – an option for the zone types 5 and 6. It changes the way of reaction to a zone

violation when armed. If the option is disabled, the alarm from zone will be delayed by

a programmed time period (ALARM DELAY). If the option is enabled, the zone will alarm

immediately (event, reporting and telephone messaging), but the loud signaling will be

delayed by a programmed time period (SIGNALING DELAY).

Delay in 2&3 type arming – an option for the 3. INTERIOR DELAYED zone type. If the option is

enabled, the zone will be armed and act as a delayed one upon activation of the type 2

(without interior) and type 3 (without interior and without entry delay) arm mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 256 Plus Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 256 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info