699031
75
Zoom out
Zoom in
Vorherige Seite
1/102
Nächste Seite
SATEL INTEGRA Plus 73
the ISOLATE user function is only available to the installer,
the SYSTEM STATE user function provides information about alarms, bypassed zones,
troubles and partition status (disarmed or type of armed mode).
Tamper if no communication with ABAX device (2h) [L.no ABAX=tamp] with this option
enabled, tamper alarm will be triggered if there is no communication with a wireless device
of the ABAX 2 / ABAX system for 2 hours.
No shortcuts in menu if this option is enabled, the user menu shortcuts are not supported.
Do not report SATEL server connection trouble [No SATEL trbl.] if this option is
enabled, loss of communication with the SATEL server will not be reported as trouble.
Do not report LAN loss on AC loss [No LAN(AC) tr.] if this option is enabled, trouble will
not be reported after Ethernet network loss in the event of control panel AC power failure.
6.4 Arming options
Display violated/bypassed zones on arming [Arm, view viol] if this option is enabled, the
user will be informed of the violated / bypassed zones when arming the system from
keypad.
If the system is being armed in the full + bypasses” mode, bypasses and violations of
the zones for which the BYPASSED IF NO EXIT option is enabled are not checked.
If the system is being armed in the without interioror without interior and without
entry delaymode, bypasses and violations of the 3. INTERIOR DELAYED type zones are
not checked (unless the DELAY IN 2&3 TYPE ARMING option is enabled for the zone).
Warn while arming if trouble [Arm, warn.trb.] if this option is enabled, the user will be
informed of the existing troubles, if any, when arming the system from keypad.
Do not arm if tampered [If tamper] if this option is enabled, arming will be impossible if
a tamper is discovered.
Do not arm if reporting trouble [If monit.trbl.] if this option is enabled, arming will be
impossible in case of any problems with reporting.
Do not arm if battery trouble [If batt. trbl.] if this option is enabled, arming will be
impossible in case of a battery failure.
Do not arm if outputs trouble [If outs. trbl.] if this option is enabled, arming will be
impossible when the control panel detects that the mainboard outputs are overloaded or
devices connected to these outputs are cut off.
Do not arm if trouble [If other trbl.] if this option is enabled, arming will be impossible in
case of a trouble.
Required system reset after verified alarm [If verif. al.] if this option is enabled, arming
will be impossible after a verified alarm.
The options DO NOT ARM IF TAMPERED, DO NOT ARM IF BATTERY TROUBLE, DO NOT ARM IF
TROUBLE, DO NOT ARM IF OUTPUTS TROUBLE and DO NOT ARM IF REPORTING TROUBLE are
available, when the WARN WHILE ARMING IF TROUBLE option is enabled.
6.5 Times
Global entry delay parameter taken into account in the delayed zones, for which the
programmed ENTRY DELAY is equal to 0.
Global alarm time time of signaling alarm in keypads, proximity card arm/disarm devices,
proximity card readers and DALLAS chip readers.
No armed indication after time counted from the moment of partition arming, during which
information about armed status is displayed on the keypads. Programming the value 0
means that keypads will indicate the armed status as long as the partition is armed.
75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Satel Integra 256 Plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Satel Integra 256 Plus

Satel Integra 256 Plus Bedienungsanleitung - Deutsch - 55 seiten

Satel Integra 256 Plus Zusatzinformation - Deutsch - 108 seiten

Satel Integra 256 Plus Installationsanweisung - Deutsch - 36 seiten

Satel Integra 256 Plus Bedienungsanleitung - Englisch - 51 seiten

Satel Integra 256 Plus Installationsanweisung - Englisch - 35 seiten

Satel Integra 256 Plus Kurzanleitung - Holländisch - 2 seiten

Satel Integra 256 Plus Zusatzinformation - Holländisch - 108 seiten

Satel Integra 256 Plus Bedienungsanleitung - Holländisch - 53 seiten

Satel Integra 256 Plus Installationsanweisung - Holländisch - 35 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info