Bedienungsanleitung Satel Integra 256 Plus (Seite 89 von 102) (Englisch)

699031

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

SATEL INTEGRA Plus 87

Identifiers

Each event code is sent to the monitoring station with an identifier. Up to 8 identifiers plus a

system identifier can be programmed. Sent with the system identifier are events related to

the alarm system (troubles, tests, etc.).

4 characters (digits or letters from A to F) must be programmed for each identifier. Using the

digit 0 in the identifier is not recommended.

For the pulse, ADEMCO EXPRESS, CONTACT ID (SELECTED) or SIA (SELECTED) formats, you must

define which events will be sent with the given identifier (see: “Identifiers assignment”).

For the CONTACT ID (FULL) or SIA (FULL) formats, each object has its own identifier.

Therefore, the identifiers of non-existing objects need not to be programmed. In the

system event identifier field, you should re-enter the identifier of the object which is

responsible for the system (for example, the object, where the control panel is

installed).

SIA / TELIM prefix

2 characters which will precede each of the identifiers in case of the SIA and TELIM formats.

Thus an identifier consisting of 6 characters can be obtained. 2 hexadecimal characters

(digits or letters from A to F) can be programmed. Entering 00 means that the prefix will not

be added. Using the digit 0 in the prefix is not recommended.

Events assignment

If the events are to be sent to both stations (STATION 1 AND 2 is selected), you can define

which event types will be reported to the given station.

It is not possible to assign events for the CONTACT ID (FULL) and SIA (FULL) formats.

10.1.3 SIA-IP

If events are to be sent in the SIA-IP format, you must program additional parameters for

each monitoring station.

Send MAC address [MAC] – if this option is enabled, the MAC address of ETHM-1 /

ETHM-1 Plus module will be sent with event code.

Send timestamp [Timestamp] – if this option is enabled, the date and time will be sent with

event code (the monitoring station can change the date and time in the control panel).

Encrypt data [Coded] – if this option is enabled, the data to be sent will be encrypted, and

the date and time will be sent with event code (the monitoring station can change the date

and time in the control panel).

SIA-IP key – the key to encrypt data to be sent using the SIA-IP format.

hex – if the option is enabled, you can enter up to 32 hexadecimal characters as the SIA-IP

KEY

. If the option is disabled, you can enter up to 16 alphanumeric characters as the

SIA-IP KEY.

SIA-IP acct – a string of up to 16 hexadecimal characters, which is used to identify the

control panel for the purpose of reporting in SIA-IP format.

Supervision interval [SIA-IP test] – an additional transmission can be sent at specified

intervals to check communication with the monitoring station. You can program a number

of days, hours, minutes and seconds between the transmissions.

10.1.4 Identifiers assignment

Define the identifier with which events relating to individual partitions, zones, keypads and

expansion modules will be sent. If no identifier is assigned to the given element of the

system, it will be impossible to define codes for events relating to it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 256 Plus Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 256 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info