Bedienungsanleitung Satel Integra 64 Plus (Seite 9 von 35) (Englisch)

699074

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

SATEL INTEGRA Plus 7

4. Expansion modules

The expansion modules allow you to not only increase the number of available zones and

outputs (wired and wireless), but also enhance the system with additional functionality.

Not all of the following modules meet the requirements of EN 50131 for Grade 3.

4.1 Modules to be connected to the keypad bus

CA-64 PTSA. Mimic board. Enables visualization of the status of the alarm system partitions

and zones. The control panels support the mimic boards with electronics version 1.4 (or

later) and firmware version 4.0 (or later).

ETHM-1 Plus / ETHM-1. Ethernet communication module. Enables reporting events as

well as operating and programming the control panel via the Ethernet network. The

recommended module version: 1.06 (or later).

INT-GSM. GPRS communication module. Enables reporting events as well as operating

and programming the alarm control panel via GPRS.

The INT-GSM module can be connected to the keypad bus of the control panel or to

the RS-485 bus of the ETHM-1 Plus module. If the ETHM-1 Plus module is connected

to the control panel keypad bus, it is recommended that the INT-GSM module be

connected to the RS-485 bus of the ETHM-1 Plus module.

INT-RS / INT-RS Plus. Interface for systems integration. Makes it possible to connect the

computer with the GUARDX program installed in the same way as to the LCD keypad,

report events through a special external device, or operate the control panel using

software other than that offered by SATEL.

Only INT-RS Plus interface is compatible with INTEGRA 256 Plus control panel.

4.2 Modules to be connected to the expander bus

INT-RX / INT-RX-S. 433 MHz keyfobs receiver expansion module. Enables operation of

the alarm system using the 433 MHz keyfobs.

INT-CR. Proximity card arm/disarm device. Enables arming / disarming and alarm clearing

in many partitions by means of proximity cards, proximity tags and other passive

transponders.

INT-S / INT-SF / INT-SK. Partition keypad. Enables arming / disarming and alarm clearing

in one partition. Can perform access control functions.

INT-SCR. Multifunctional keypad. It can work as:

INT-S. Partition keypad.

INT-SCR. Partition keypad with reader. Functionality similar to that of the partition

keypad.

INT-ENT. Entry keypad. The main task of the entry keypad is activation the delay for 3

INTERIOR DELAYED type zones. After expiry of the time period preset on the keypad,

unless the system is disarmed, the interior delayed zones will again act as instant

ones.

INT-SZ / INT-SZK. Code lock. Enables performance of the access control functions.

INT-R. Universal expander for card / chip readers. Supports the proximity card readers

manufactured by SATEL, readers with WIEGAND 26 interface or DALLAS chip readers.

Enables performance of the access control functions.

INT-E / CA-64 E / CA-64 EPS. Zone expander. Adds 8 programmable hardwired zones to

the security system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 64 Plus Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 64 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info